Inspecting, Patterning EUV Masks

By Mark LaPedus - 06 Nov, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss lithography and photomask trends with Bryan Kasprowicz, director of technology and strategy and a distinguished member of the technical staff at Photronics; Thomas Scheruebl, director of strategic business development and product strategy at Zeiss; Noriaki Nakayamada, senior technologist at NuFlare; and Aki Fujimura, chief executive of D2S. What fol... » read more

EUV Pellicle, Uptime And Resist Issues Continue

By Mark LaPedus - 26 Sep, 2018 - Comments: 0

Extreme ultraviolet (EUV) lithography is moving closer to realization, but several problems involving scanner uptime, photoresists and pellicles need to be resolved before this long-overdue technology is put into full production. Intel, Samsung and TSMC are hoping to insert EUV into production at 7nm and/or 5nm. While the remaining issues don’t necessarily pre-empt using EUV, they do affec... » read more

What’s Missing In EUV?

By Mark LaPedus - 17 May, 2018 - Comments: 0

Extreme ultraviolet (EUV) lithography is expected to move into production at 7nm and/or 5nm, but as previously reported, there are some gaps in the arena. At one time, the power source was the big problem, but that appears to be solved in the near term. Now, a phenomenon called stochastic effects, or random variations, are the biggest challenge for EUV lithography. But at most events, th... » read more

More Lithography/Mask Challenges (part 1)

By Mark LaPedus - 15 Mar, 2018 - Comments: 2

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Gregory McIntyre, director of the Advanced Patterning Department at [getentity id="22217" e_name="Imec"]; Harry Levinson, senior fellow and senior director of technology research at [getentity id="22819" comment="GlobalFoundries"]; Regina Freed, managing director of patterning technology at [getentity id="... » read more

Searching For EUV Mask Defects

By Mark LaPedus - 19 Oct, 2017 - Comments: 2

Chipmakers hope to insert extreme ultraviolet (EUV) lithography at 7nm and/or 5nm, but several challenges need to be solved before this technology can be used in production. One lingering issue that is becoming more worrisome is how to find [gettech id="31045" comment="EUV"] mask defects. That isn't the only issue, of course. The industry continues to work on the power source and resists. Bu... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.