tag: advanced packaging

Audio, Visual Advances Intensify IC Design Tradeoffs
By Ann Mutschler - 13 Jun, 2022 - Comments: 0

A spike in the number of audio and visual sensors is greatly increasing design complexity in chips and systems, forcing engineers to make tradeoffs that can affect performance, power, and cost. Collectively, these sensors generate so much data that designers must consider where to process different data, how to prioritize it, and how to optimize it for specific applications. The tradeoffs in... » read more

DRAM Thermal Issues Reach Crisis Point
By Karen Heyman - 09 Jun, 2022 - Comments: 5

Within the DRAM world, thermal issues are at a crisis point. At 14nm and below, and in the most advanced packaging schemes, an entirely new metric may be needed to address the multiplier effect of how thermal density increasingly turns minor issues into major problems. A few overheated transistors may not greatly affect reliability, but the heat generated from a few billion transistors does.... » read more

Center Stage: The Time For Hybrid Bonding Has Arrived
By Woo Young Han - 07 Jun, 2022 - Comments: 0

When the subject of hybrid bonding is brought up in the industry, the focus is often on how this technique is used to manufacture CMOS image sensors (CIS), an essential device for today’s digital cameras, particularly those found in smartphones. As such, CIS is a common touchpoint given the ubiquity of mobile phones, whether you hold a product from Apple, Samsung, or Huawei in your hands. ... » read more

Standardizing Chiplet Interconnects
By John Koon - 23 May, 2022 - Comments: 0

The chip industry is making progress on standardizing the infrastructure for chiplets, setting the stage for faster and more predictable integration of different functions and features from different vendors. The ability to choose from a menu of small, highly specialized chips, and to mix and match them for specific applications and use cases, has been on the horizon for more than a decade. ... » read more

Bridging IC Design, Manufacturing, And In-Field Reliability
By Ed Sperling - 18 May, 2022 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to talk about silicon lifecycle management and how that can potentially glue together design, manufacturing, and devices in the field, with Prashant Goteti, principal engineer at Intel; Rob Aitken, R&D fellow at Arm; Zoe Conroy, principal hardware engineer at Cisco; Subhasish Mitra, professor of electrical engineering and computer sci... » read more

New End Markets, More Demand For Complex Chips
By Ed Sperling - 16 May, 2022 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss economic conditions and how that affects chip design with Anirudh Devgan, president and CEO of Cadence; Joseph Sawicki, executive vice president of Siemens EDA; Niels Faché, vice president and general manager at Keysight; Simon Segars, advisor at Arm; and Aki Fujimura, chairman and CEO of D2S. This discussion was held in front... » read more

DRAM Choices Becoming Central Design Considerations
By Ann Mutschler - 12 May, 2022 - Comments: 0

Chipmakers are paying much closer attention to various DRAM options as they grapple with what goes on-chip or into a package, elevating attached memory to a critical design element that can affect system performance, power, and cost. These are increasingly important issues to sort through with a number of tradeoffs, but the general consensus is that to reach the higher levels of performance ... » read more

Chiplets: Current Status
By Andy Heinig - 12 May, 2022 - Comments: 0

Recent weeks have seen a number of interesting developments in the area of chiplets. An increasing number of products based on chiplets have been brought to market, especially in the processors segment. For example, Apple and AMD now have processors with chiplets on the market and under production in high volumes. On one hand, this means that sufficient production capacity has now been built up... » read more

Big Changes In Materials And Processes For IC Manufacturing
By Ed Sperling And Laura Peters - 21 Apr, 2022 - Comments: 3

Rama Puligadda, CTO at Brewer Science, sat down with Semiconductor Engineering to talk about a broad set of changes in semiconductor manufacturing, packaging, and materials, and how that will affect reliability, processes, and equipment across the supply chain. SE: What role do sacrificial materials play in semiconductor manufacturing, and how is that changing at new process nodes? Puliga... » read more

Planning EDA’s Next Steps
By Ed Sperling - 24 Mar, 2022 - Comments: 0

Anirudh Devgan, Cadence's new CEO, and the recipient of the Phil Kaufman Award in December, sat down with Semiconductor Engineering to talk about what's next in EDA, the underlying technology and business challenges and changes, and new markets that are unfolding for floor-planning, verification, CFD, and advanced packaging. SE: Where does EDA need to improve? Devgan: We have made it much... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy