tag: Apache Design

The Power Game
By Ann Mutschler - 11 Apr, 2013 - Comments: 0

By Ann Steffora Mutschler Semiconductor engineering teams always have focused on stepping up performance in new designs, but in the mobile, GPU and tablet markets they’re finding that maintaining the balance between higher performance and the same or lower power is increasingly onerous. The reason: Extreme gaming applications can create scenario files that cause dynamic power consumpt... » read more

Dealing With The Data Glut
By Ann Mutschler - 11 Apr, 2013 - Comments: 0

By Ann Steffora Mutschler Tools like emulation and simulation are an absolute necessity to design and verify today’s complex SoCs, but what happens when you want to do power analysis and the file sizes are too massive for the emulator to handle? Even with an emulator a five-minute mobile phone call could take three months. Understandably, this issue is causing pain to many design teams... » read more

Optimizing Cost-Performance-Schedule With A Chip-Package-System (CPS) Methodology
By Various Writers - 11 Apr, 2013 - Comments: 0

To meet smart device requirements with high levels of sophistication from an exceedingly small device running off a battery, the underlying electronics must evolve at a rapid pace. To read more, click here. » read more

Challenges In IC And Electronic Systems Verification
By Aveek Sarkar - 11 Apr, 2013 - Comments: 0

By Aveek Sarkar Designing successful electronic systems that can meet the needs of a challenging and quickly evolving mobile market requires design teams to solve critical problems such as power efficiency, unrealistic schedules, and cost-down considerations. In this first of a three-part series, we will look at these challenges. Part 1: The Growing Challenges Designing electronic systems ... » read more

Verifying Your Intent
By Ann Mutschler - 21 Mar, 2013 - Comments: 0

Design rule checking (DRC), layout versus schematic (LVS) and electrical rule checking (ERC) are physical verification techniques that are mandatory today to check a design and its structures before manufacturing. Checking electrical characteristics of a design is one thing. Verifying power intent is quite another. And the overlap of the two is an intriguing concept. Case in point: Checking fo... » read more

A Balancing Act
By Ann Mutschler - 14 Mar, 2013 - Comments: 0

By Ann Steffora Mutschler If you stay current on data center trends, you are well-versed on the fact that Intel reported last June energy proportionality has effectively doubled server efficiency and workload scaling beyond what Moore’s Law predicted. What does this have to do with power management of SoCs? Cary Chin, director of marketing for low-power solutions at Synopsys, said tha... » read more

Hot Stuff
By Ann Mutschler - 14 Mar, 2013 - Comments: 0

By Ann Steffora Mutschler When it comes to thermal modeling, which has been practiced for many years, the challenges are daunting. The good news is that approaches are emerging as challenges increased with smaller process nodes and design complexity. Viewed from a number of viewpoints—transistor, chip, package, board and system—thermal models traditionally have been created from m... » read more

Shock Value
By Norman Chang - 14 Mar, 2013 - Comments: 0

By Norman Chang Chip-Package-System (CPS) ESD simulation enables system-wide ESD robustness validation, a common challenge in automotive and aerospace applications. To enable CPS ESD analysis requires an accurate chip electrostatic discharge (ESD) model and a comprehensive system-level ESD methodology. Using an accurate ESD chip model provides the following three benefits. First it helps de... » read more

Good Times For Analog Designers
By Ann Mutschler - 14 Feb, 2013 - Comments: 1

By Ann Steffora Mutschler For a number of technological reasons, analog/mixed-signal design and low-power design are converging, and with that comes both challenges and opportunities. As far as challenges go, process variations at 14nm, 20nm and even 28nm have increased significantly to include DFM impacts such as layout-delay effects. On the digital side, those process changes affect... » read more

Managing Electrical Communications Better
By Ann Mutschler - 14 Feb, 2013 - Comments: 0

By Ann Steffora Mutschler Managing the electrical components of signal paths between IC, package, board and system is no small task, and it’s only growing in complexity. Understanding how to correctly optimize the communications within a system is critical given that the I/O power is becoming a significant portion of the overall chip power as the number of bits and the speed at which t... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy