New BEOL/MOL Breakthroughs?

By Mark LaPedus - 15 Jun, 2017 - Comments: 1

Chipmakers are moving ahead with transistor scaling at advanced nodes, but it's becoming more difficult. The industry is struggling to maintain the same timeline for contacts and interconnects, which represent a larger portion of the cost and unwanted resistance in chips at the most advanced nodes. A leading-edge chip consists of three parts—the transistor, contacts and interconnects. The ... » read more

The Race To 10/7nm

By Mark LaPedus - 22 May, 2017 - Comments: 4

Amid the ongoing ramp of 16/14nm processes in the market, the industry is now gearing up for the next nodes. In fact, GlobalFoundries, Intel, Samsung and TSMC are racing each other to ship 10nm and/or 7nm technologies. The current iterations of 10nm and 7nm technologies are scaled versions of today’s 16nm/14nm finFETs with traditional copper interconnects, high-k/metal-gate and low-k diele... » read more

Moore’s Law: A Status Report

By Ed Sperling - 20 Apr, 2017 - Comments: 3

Moore's Law has been synonymous with "smaller, faster, cheaper" for the past 52 years, but increasingly it is viewed as just one of a number of options—some competing, some complementary—as the chip industry begins zeroing in on specific market needs. This does not make [getkc id="74" comment="Moore's Law"] any less relevant. The number of companies racing from 16/14nm to 7nm is higher t... » read more

Many Paths To Hafnium Oxide

By Katherine Derbyshire - 31 Mar, 2016 - Comments: 0

Equipment and materials suppliers often talk about the fragmentation of integrated circuit processing. While the number of manufacturers has gone down, the diversity of the underlying semiconductor market has increased. Low-power processors for mobile devices, non-volatile memory for solid state disks, and dedicated graphics processors all have different requirements from the traditional ind... » read more

ALD Market Heats Up

By Mark LaPedus - 17 Sep, 2015 - Comments: 1

Amid the shift to 3D NAND, finFETs and other device architectures, the atomic layer deposition (ALD) market is heating up on several fronts. Applied Materials, for example, recently moved to shakeup the landscape by rolling out a new, high-throughput ALD tool. Generally, [getkc id="250" kc_name="ALD"] is a process that deposits materials layer-by-layer at the atomic level, enabling thin and ... » read more

Fab Issues At 7nm And 5nm

By Mark LaPedus - 23 Jul, 2015 - Comments: 2

The race toward the 7nm logic node officially kicked off in July, when IBM Research, GlobalFoundries and Samsung jointly rolled out what the companies claim are the industry’s first 7nm test chips with functional transistors. They're not alone, of course. Intel and TSMC also are racing separately to develop 7nm technology. And in the R&D labs, chipmakers also are working on technologies f... » read more

Next Channel Materials?

By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Chipmakers are making a giant leap from planar transistors to [getkc id="185" kc_name="finFETs"]. Initially, [getentity id="22846" e_name="Intel"] moved into finFET production at 22nm and is now ramping up its second-generation finFETs at 14nm. And the other foundries will enter the finFET fray at 16nm/14nm. So what’s next? Chipmakers will likely extend the finFET architecture to both 10nm... » read more

Experts At The Table: 450mm Fab And Facilities Challenges

By Mark LaPedus - 09 Aug, 2013 - Comments: 0

Semiconductor Manufacturing & Design sat down to discuss future 450mm fab and facilities challenges with Gerald Goff, director of the project management office for fab design and construction at GlobalFoundries; Joe Cestari, president of Total Facility Solutions; Ivo Raaijmakers, chief technology officer of ASM International; and Michael Brain, senior director of the Fab Solutions Business ... » read more

Experts At The Table: 450mm Fab And Facilities Challenges

By Mark LaPedus - 02 Aug, 2013 - Comments: 0

Experts At The Table: 450mm Fab And Facilities Challenges

By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus Semiconductor Manufacturing & Design sat down to discuss future 450mm fab and facilities challenges with Gerald Goff, director of the project management office for fab design and construction at GlobalFoundries; Joe Cestari, president of Total Facility Solutions; Ivo Raaijmakers, chief technology officer of ASM International; and Michael Brain, senior director of the Fab S... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: ASM International

New BEOL/MOL Breakthroughs?

The Race To 10/7nm

Moore’s Law: A Status Report

Many Paths To Hafnium Oxide

ALD Market Heats Up

Fab Issues At 7nm And 5nm

Next Channel Materials?

Experts At The Table: 450mm Fab And Facilities Challenges

Experts At The Table: 450mm Fab And Facilities Challenges

Experts At The Table: 450mm Fab And Facilities Challenges