tag: BiST

Analog: Avoid Or Embrace?
By Brian Bailey - 16 Jan, 2020 - Comments: 0

We live in an analog world, but digital processing has proven quicker, cheaper and easier. Moving digital data around is only possible while the physics of wires can be safely abstracted away enough to provide reliable communications. As soon as a signal passes off-chip, the analog domain reasserts control for modern systems. Each of those transitions requires a data converter. The usage ... » read more

Improving In-System Test With Tessent VersaPoint Test Point Technology
By Mentor, a Siemens Business - 14 Jan, 2020 - Comments: 0

This paper describes a new versatile test point technology called VersaPoint, which has been developed specifically to work with designs implementing mixed EDT/LBIST methodologies to reduce EDT pattern counts and improve Logic BIST (LBIST) test coverage. VersaPoint test points can reduce compressed pattern counts 2X to 4X beyond compression alone and improve LBIST test coverage beyond what is p... » read more

Automakers Changing Tactics On Reliability
By Susan Rambo - 14 Jan, 2020 - Comments: 0

Automakers are beginning to rethink how to ensure automotive electronics will remain reliable over their projected lifetimes, focusing their efforts on redundancy, more data-centric architectures and continued testing throughout the life of a vehicle. It is still too early to really know how automotive chips actually will perform over the next 15 to 20 years, especially AI logic developed at... » read more

Scan Diagnosis
By Ed Sperling - 20 Dec, 2019 - Comments: 1

Jayant D’Souza, product manager at Mentor, a Siemens Business, explains the difference between scan test and scan diagnosis, what causes values in a scan test to change, how this can be used to hone in on the actual cause of a failure in a design, and how to utilize test hardware more efficiently. » read more

Hierarchical DFT On A Flat Layout Design
By Vidya Neerkundar - 06 Aug, 2019 - Comments: 0

The use of hierarchical DFT methods is growing as design size and complexity stresses memory requirements and design schedules.  Hierarchical DFT divides the design into smaller pieces, creates test structures and patterns at the core level, then retargets the core patterns to the chip level. But, if you need to perform the physical place and route on the full flat design, can you still take a... » read more

ON Semiconductor Reduces Memory BiST Insertion Time By 6X With Tessent Hierarchical Flow
By Mentor, a Siemens Business - 05 Aug, 2019 - Comments: 0

This paper describes a case study on the insertion of memory BiST for an ON Semiconductor multi-million gate-level netlist with 300 memory instances. The physical implementation will be done using a flat layout. Two different methodologies can be applied when it comes to physical implementation; hierarchical or fullflat. When performing physical implementation as full-flat flow, typically the D... » read more

BiST Grows Up In Automotive
By Ann Mutschler - 12 Jun, 2019 - Comments: 0

Test concepts and methods that have been used for many years in traditional semiconductor and SoC design are now being leveraged for automotive chips, but they need to be adapted and upgraded to enable monitoring of advanced automotive systems during operation of a vehicle. Automotive and safety critical designs have very high quality, reliability, and safety requirements, which pairs pe... » read more

In-Chip Monitoring Becoming Essential Below 10nm
By Ann Mutschler - 20 May, 2019 - Comments: 0

Rising systemic complexity and more potential interactions in heterogeneous designs is making it much more difficult to ensure a chip, or even a block within a chip, will functioning properly without actually monitoring that behavior in real-time. Continuous and sporadic monitoring have been creeping into designs for the past couple of decades. But it hasn’t always been clear how effective... » read more

Meeting ISO 26262 Requirements Using Tessent IC Test Solutions
By Mentor, a Siemens Business - 07 May, 2019 - Comments: 0

As the industry moves towards greater automation in vehicles, suppliers of the ICs used to drive the automotive electronic systems are rapidly adopting solutions to meet ISO 26262 requirements. The Tessent family of IC test products offers the highest defect coverage, in-system non-destructive memory test, hybrid ATPG/Logic BIST, and analog test coverage measurement. These technologies add up t... » read more

Automotive, AI Drive Big Changes In Test
By Ann Mutschler - 25 Apr, 2019 - Comments: 0

Design for test is becoming enormously more challenging at advanced nodes and in increasingly heterogeneous designs, where there may be dozens of different processing elements and memories. Historically, test was considered a necessary but rather mundane task. Much has changed over the past year or so. As systemic complexity rises, and as the role of ICs in safety-critical markets continues ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy