Manufacturing Bits: June 18

By Mark LaPedus - 18 Jun, 2019 - Comments: 0

Making microvias in packages At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, Georgia Institute of Technology, Tokyo Ohka Kogyo (TOK) and Panasonic presented a paper on a technology that enables ultra-small microvias for advanced IC packages. Researchers demonstrated a picosecond UV laser technology as well as materials, which enabled 2μm to 7μm vias... » read more

Manufacturing Bits: June 10

By Mark LaPedus - 10 Jun, 2019 - Comments: 1

Predicting warpage in packages At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, there were several papers on ways to predict variation and warpage in IC packages. Advanced packages are prone to unwanted warpage during the process flow. The warpage challenges escalate as the packages become thinner. Warpage in turn can impact yields in IC packages. ... » read more

ECTC Packaging Trends

By Mark LaPedus - 10 Jun, 2019 - Comments: 0

At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, a number of packaging houses, R&D organizations and universities presented a slew of papers on the latest IC packaging technologies. The event provided a glimpse of the future of packaging, which is becoming more important in the industry. At one time, IC packaging took a backseat in the semiconductor... » read more

Manufacturing Bits: June 4

By Mark LaPedus - 04 Jun, 2019 - Comments: 0

Chiplet printer A number of companies, R&D organizations and universities separately presented a slew of papers and technologies at the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas. It’s difficult to write about all of the papers at ECTC. But one paper that stood out is a prototype chiplet micro-assembly printer developed by the Palo Alto Research Cente... » read more

Advanced Packaging Confusion

By Ed Sperling - 13 Jun, 2018 - Comments: 2

Advanced packaging is exploding in all directions. There are more chipmakers utilizing different packaging options, more options for the packages themselves, and a confusing array of descriptions and names being used for all of these. Several years ago, there were basically two options on the table, 3D-ICs and 2.5D. But as chipmakers began understanding the difficulty, cost and reduced benef... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

Legacy Process Nodes Going Strong

The critical, and growing, significance of mature node chips and processes.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: ECTC

Manufacturing Bits: June 18

Manufacturing Bits: June 10

ECTC Packaging Trends

Manufacturing Bits: June 4

Advanced Packaging Confusion

Trending Articles

Hybrid Bonding Makes Strides Toward Manufacturability

Americas Chip Funding Energizes Industry

Advanced Packaging Driving New Collaboration Across Supply Chain

Chiplets Make Progress Using Interconnects As Glue

2D Semiconductors Make Progress, But So Does Silicon

Knowledge Centers
Entities, people and technologies explored