tag: GlobalFoundries

SoC Integration Mistakes
By Ed Sperling - 26 Feb, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss integration challenges with Ruggero Castagnetti, distinguished engineer at LSI; Rob Aitken, an ARM fellow; Robert Lefferts, director of engineering in Synopsys’ Solutions Group; Bernard Murphy, chief technology officer at Atrenta; and Luigi Capodieci, R&D fellow at GlobalFoundries. What follows are excerpts of that roundtable discussion. S... » read more

Week In Review: Manufacturing, Design, Test
By Mark LaPedus - 21 Feb, 2014 - Comments: 0

Reports have surfaced that IBM’s semiconductor unit is on the block, and there has been discussion about the reasons and the aftermath. Sources say there are at least two potential buyers for the unit—Samsung and TowerJazz. Apparently, the talks between IBM-Samsung and IBM-TowerJazz have been going on for some time. Multiple sources believe that Samsung is interested in buying IBM’s advan... » read more

The Search For The Next Transistor
By Mark LaPedus - 20 Feb, 2014 - Comments: 3

In the near term, the leading-edge chip roadmap looks fairly clear. Chips based on today’s finFETs and planar fully depleted silicon-on-insulator (FDSOI) technologies are expected to scale down to the 10nm node. But then, the CMOS roadmap becomes foggy at 7nm and beyond. The industry has been exploring a number of next-generation transistor candidates, but suddenly, a few technologies are ... » read more

SoC Integration Mistakes
By Ed Sperling - 13 Feb, 2014 - Comments: 2

Semiconductor Engineering sat down to discuss integration challenges with Ruggero Castagnetti, distinguished engineer at LSI; Rob Aitken, an ARM fellow; Robert Lefferts, director of engineering in Synopsys’ Solutions Group; Bernard Murphy, chief technology officer at Atrenta; and Luigi Capodieci, R&D fellow at GlobalFoundries. What follows are excerpts of that roundtable discussion. SE... » read more

Week In Review: Manufacturing, Design, Test
By Mark LaPedus - 07 Feb, 2014 - Comments: 0

This is no surprise, but it could be the end of an era. IBM is exploring a sale of its semiconductor business, according to FT.com. A survey, conducted by Harris Interactive on behalf of Crucial.com, revealed that when asked to choose between these two specific types of men, 84% of women who prefer to be involved with men prefer their male love interest to be "super handy" with computers an... » read more

Week In Review: Manufacturing, Design, Test
By Mark LaPedus - 31 Jan, 2014 - Comments: 0

The technology of 3D "bioprinting" (the medical application of 3D printing to produce living tissue and organs) is advancing so quickly that it will spark a major ethical debate on its use by 2016, according to Gartner. At the same time, 3D printing of non-living medical devices such as prosthetic limbs, combined with a burgeoning population and insufficient levels of healthcare in emerging mar... » read more

What’s After CMOS?
By Mark LaPedus - 24 Jan, 2014 - Comments: 3

Chipmakers continue to scale the CMOS transistor to finer geometries, but the question is for how much longer. The current thinking is that the CMOS transistor could scale at least to the 3nm node in the 2021 timeframe. And then, CMOS could run out of gas, prompting the need for a new switch technology. So what’s after the CMOS-based transistor? Carbon nanotubes and graphene get the most a... » read more

Week In Review: Manufacturing, Design, Test
By Mark LaPedus - 24 Jan, 2014 - Comments: 0

Look for a nasty political campaign in Idaho, according to Bloomberg. Business leaders from Micron Technology and others in Idaho are endorsing the incumbent Republican candidate over a Tea Party challenger. The challenger, Bryan Smith, is a conservative Republican running for Idaho’s second congressional district. He is running against 16-year incumbent Mike Simpson. Simpson is supposedly pr... » read more

Waiting For Next-Generation Lithography
By Mark LaPedus - 23 Jan, 2014 - Comments: 2

Nearly 30 years ago, optical lithography was supposed to hit the wall at the magical 1 micron barrier, prompting the need for a new patterning technology such as direct-write electron beam and X-ray lithography. At that time, however, the industry was able to push optical lithography for volume chip production at the 1-micron node and beyond. This, in turn, effectively killed direct-write e-... » read more

The Week In Review: Manufacturing And Design
By Mark LaPedus - 10 Jan, 2014 - Comments: 1

Crucial.com reveals a surprising way to gain more time for improving one's personal health: fix a slow computer. A nationwide survey revealed that U.S. adults think they waste an average of 16 minutes per day waiting for their computer to load or boot up. Equating to two hours each week and four days per year lost to the wiles of a slow computer, it's no surprise that 66% of Americans say that ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy