tag: Mentor

Reducing Power Delivery Overhead
By Brian Bailey - 08 Jul, 2021 - Comments: 0

The power delivery network (PDN) is a necessary overhead that typically remains in the background — until it fails. For chip design teams, the big question is how close to the edge are they willing to push it? Or put differently, is the gain worth the pain? This question is being scrutinized in very small geometry designs, where margins can make a significant difference in device performan... » read more

Retimers Replacing Redrivers As Signal Speeds Increase
By Bryon Moyer - 08 Jul, 2021 - Comments: 1

Retimers are undergoing a renaissance as new PHY protocols prove too demanding for redrivers. Redrivers and retimers both have been used to extend wired signal reach over the years. But redrivers have dominated this space due to their relative simplicity and lower cost. That balance is beginning to change. “A retimer represents three things no one wants in their system — area, cost, a... » read more

Bringing Reset And Power Domains Together
By Siemens EDA - 07 Jul, 2021 - Comments: 0

The Unified Power format (UPF) standard enables designers to add power intent for a design. For power management, designers typically partition a design into power domains. Interactions between these power domains are done through various power control logic, like retention logic, isolation logic, and level shifters. Designers need to validate that the power control logic does not introduce new... » read more

Blog Review: July 7
By Jesse Allen - 07 Jul, 2021 - Comments: 0

Cadence's Sangeeta Soni provides a primer on the PIPE SerDes architecture and some of the changes that can introduce verification challenges for SerDes compliant PHY and MAC devices. Siemens EDA's Chris Spear demystifies the $cast() method in SystemVerilog, which checks values at runtime rather than compile time, and gives some examples of when it is useful. Synopsys' Chris Clark warns th... » read more

Packetized Scan Test Delivery
By Geir Eide - 06 Jul, 2021 - Comments: 0

The traditional approach to moving scan test data from chip-level pins to core-level scan channels is under pressure due to the dramatic rise in design size, design complexity, and test adaptation. To address these challenges, we now have the option of implementing a packetized data network for scan test that moves the scan data through the SoC much more efficiently than the traditional pin-... » read more

IC Data Hot Potato: Who Owns And Manages It?
By SE Staff - 06 Jul, 2021 - Comments: 1

Modern inspection, metrology, and test equipment produces a flood of data during the manufacturing and testing of semiconductors. Now the question is what to do with all of that data. Image resolutions in inspection and metrology have been improving for some time to deal with increased density and smaller features, creating a downstream effect that has largely gone unmanaged. Higher resoluti... » read more

Week In Review: Design, Low Power
By Jesse Allen - 02 Jul, 2021 - Comments: 0

Tools Imperas and Valtrix inked a multi-year distribution and support agreement that makes Imperas simulation technology and RISC-V reference models available pre-integrated within Valtrix STING for RISC-V processor verification. The combined solution covers the full RISC-V specification for user, privilege, and debug modes, including all ratified standard extensions, and the near ratified (st... » read more

Week In Review: Auto, Security, Pervasive Computing
By SE Staff - 02 Jul, 2021 - Comments: 0

Security The U.S. government agencies put out a warning that Russian military has been using a Kubernetes cluster to attempt distributed and anonymized brute force access against hundreds of government and private sector targets worldwide. Department of Homeland Security (DHS)’s Cybersecurity and Infrastructure Security Agency (CISA), the Federal Bureau of Investigation (FBI), the National S... » read more

New Design Approaches For Automotive
By Ann Mutschler - 01 Jul, 2021 - Comments: 0

The push toward increasing autonomy in automotive is driving new approaches in electronics development. Instead of designing individual components, the focus now is on modeling in context. The ultimate goal is to create an executable specification based on industry-accepted standards, with enough flexibility to be able to customize that spec for different customers. This is a difficult engin... » read more

‘Hug The Debug’ – Before It’s Too Late
By Sumit Vishwakarma - 01 Jul, 2021 - Comments: 0

Though the term “shift-left” originated in the software industry, its importance is often cited in the hardware (semiconductor) industry where the end-product (chip) costs are skyrocketing. The increase in cost is driven by a global chip shortage, especially in the automotive industry. Manufacturing a robust chip is a long, iterative process that may require many re-spins. Shift-left refers... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy