Fan-Out Packaging Gets Competitive

By Karen Heyman and Laura Peters - 18 Aug, 2022 - Comments: 0

Fan-out wafer-level packaging (FOWLP) is a key enabler in the industry shift from transistor scaling to system scaling and integration. The design fans out the chip interconnects through a redistribution layer instead of a substrate. Compared to flip-chip ball grid array (FCBGA) or wire bonds, it creates lower thermal resistance, a slimmer package, and potentially lower costs. Yet, if the h... » read more

Expanding Advanced Packaging Production In The U.S.

By Mark LaPedus - 05 Jan, 2022 - Comments: 0

The United States is taking the first steps toward bringing larger-scale IC packaging production capabilities back to the U.S. as supply chain concerns and trade tensions grow. The U.S. is among the leaders in developing packages, especially new and advanced forms of the technology that promise to shake up the semiconductor landscape. And while the U.S. has several packaging vendors, North A... » read more

Next Steps For Panel-Level Packaging

By Mark LaPedus - 20 Dec, 2021 - Comments: 1

Tanja Braun, group manager at Fraunhofer Institute for Reliability and Microintegration (IZM), sat down with Semiconductor Engineering to talk about III-V device packaging, chiplets, fan-out and panel-level processing. Fraunhofer IZM recently announced a new phase of its panel-level packaging consortium. What follows are excerpts of that discussion. SE: IC packaging isn’t new, but years a... » read more

Planning For Panel-Level Fan-out

By Mark LaPedus - 21 Nov, 2019 - Comments: 0

Several companies are developing or ramping up panel-level fan-out packaging as a way to reduce the cost of advanced packaging. Wafer-level fan-out is one of several advanced packaging types where a package can incorporate dies, MEMS and passives in an IC package. This approach has been in production for years, and is produced in a round wafer format in 200mm or 300mm wafer sizes. Fan-out... » read more

Panel Fan-out Ramps, Challenges Remain

By Mark LaPedus - 05 Nov, 2018 - Comments: 0

After years of R&D, panel-level fan-out packaging is finally beginning to ramp up in the market, at least in limited volumes for a few vendors. However, panel-level fan-out, which is an advanced form of today’s fan-out packaging, still faces several technical and cost challenges to bring this technology into the mainstream or high-volume manufacturing. Moreover, several companies are d... » read more

Cheaper Fan-Outs Ahead

By Mark LaPedus - 07 Aug, 2017 - Comments: 6

Packaging houses continue to ramp up fan-out wafer-level packages in the market, but customers want lower cost fan-out products for a broader range of applications, such as consumer, RF and smartphones. So in R&D, the industry for some time has been developing next-generation fan-out using a panel-level format, a technology that could potentially lower the cost of fan-out. But there are ... » read more

OSAT Biz: Growth And Challenges

By Mark LaPedus - 08 Feb, 2017 - Comments: 0

Amid a challenging business environment, the outsourced semiconductor assembly and test (OSAT) industry is projected to see steady to strong growth in a number of packaging segments this year. Right now, the [getkc id="83" kc_name="OSATs"]—which provide third-party IC-packaging and test services—are seeing brisk demand for both legacy and advanced chip packages. In addition, IDMs continu... » read more

Inside The OSAT Business

By Mark LaPedus - 17 Mar, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss the IC-packaging industry, foundries, China and other topics with Tien Wu, chief operating officer at Taiwan's Advanced Semiconductor Engineering (ASE), the world's largest outsourced semiconductor assembly and test (OSAT) vendor. What follows are excerpts of that conversation. SE: What is your overall outlook for 2016? Wu: Last year, the semi... » read more

Consolidation Hits OSAT Biz

By Mark LaPedus - 18 Feb, 2016 - Comments: 0

The outsourced semiconductor assembly and test (OSAT) industry is undergoing a new wave of acquisition activity that will dramatically reshape the packaging and test services markets. [getkc id="83" kc_name="OSATs"] have seen a considerable amount of consolidation over the years, but the industry needs a scorecard to keep track of the recent deals and the resulting fallout. One OSAT deal inv... » read more

Inside Advanced Packaging

By Mark LaPedus - 18 Feb, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss advanced IC-packaging, the OSAT industry, China and other topics with Ron Huemoeller, vice president of worldwide R&D at Amkor. What follows are excerpts of that conversation. SE: Where are we in advanced IC-packaging today? Huemoeller: We’ve hit the inflection point. Now we are coming to the other side of it. Regarding this need to int... » read more

← Older posts

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?