Planning For Panel-Level Fan-out

By Mark LaPedus - 21 Nov, 2019 - Comments: 0

Several companies are developing or ramping up panel-level fan-out packaging as a way to reduce the cost of advanced packaging. Wafer-level fan-out is one of several advanced packaging types where a package can incorporate dies, MEMS and passives in an IC package. This approach has been in production for years, and is produced in a round wafer format in 200mm or 300mm wafer sizes. Fan-out... » read more

Panel Fan-out Ramps, Challenges Remain

By Mark LaPedus - 05 Nov, 2018 - Comments: 0

After years of R&D, panel-level fan-out packaging is finally beginning to ramp up in the market, at least in limited volumes for a few vendors. However, panel-level fan-out, which is an advanced form of today’s fan-out packaging, still faces several technical and cost challenges to bring this technology into the mainstream or high-volume manufacturing. Moreover, several companies are d... » read more

Choosing The Right Interconnect

By Ed Sperling - 09 Apr, 2018 - Comments: 3

Efforts to zero in on cheaper advanced packaging approaches that can speed time to market are being sidetracked by a dizzying number of choices. At the center of this frenzy of activity is the [getkc id="36" kc_name="interconnect"]. Current options range from organic, silicon and glass interposers, to bridges that span different die at multiple levels. There also are various fan-out approach... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: SEMCO

Planning For Panel-Level Fan-out

Panel Fan-out Ramps, Challenges Remain

Choosing The Right Interconnect