tag: sensors

Synthetic Sensors: Towards General-Purpose Sensing (Carnegie Mellon Univ)
By Technical Paper Link - 16 May, 2017 - Comments: 0

Source: Carnegie Mellon University, Human-Computer Interaction Institute, Gierad Laput, Yang Zhang, Chris Harrison Although ubiquitous sensors seem almost synonymous with the IoT, some Carnegie Mellon University researchers say sensing with a single, general purpose sensor for each room may be better. The team has developed a plug-in sensor package that monitors multiple phenomena — sou... » read more

The Week In Review: IoT
By Jeff Dorsch - 12 May, 2017 - Comments: 0

Conferences The Internet of Things World conference is on tap next week at the Santa Clara Convention Center in Silicon Valley. There will be more than 250 exhibitors on the show floor, with 11,000 attendees expected. More than 400 speakers will make presentations over three days, May 16-17-18. ON Semiconductor will have a number of IoT-related products to demonstrate at its booth, including i... » read more

The Future of Testing
By Jeff Dorsch - 08 May, 2017 - Comments: 0

In our previous test blog posts, we looked at the history of automated test equipment for semiconductors and for printed circuit boards. This month, we look ahead to the test technologies that are emerging. The chip ATE field has essentially boiled down to Advantest, Teradyne, and Xcerra (LTX-Credence), while the board test market is dominated by Teradyne and Keysight Technologies (formerly ... » read more

Sensors, Sensors Everywhere
By Amin Kashi - 04 May, 2017 - Comments: 0

Here’s a statement that will surprise no one: autonomous driving was once again a big theme last month at SAE World Congress in Detroit. This is the case at nearly any automotive or tech show these days. There were dozens of displays related to self-driving tech on the exhibit floor, a fact captured in the various social media feeds and news coverage of the event. Mentor was part of this s... » read more

Creating Reliable SoCs For Safe ADAS Applications
By Ravi Ravikumar - 13 Apr, 2017 - Comments: 0

Every major automaker is in the process of bringing out autonomous vehicles with ADAS (advanced driver assistance systems). In addition to processors and embedded software, ADAS requires a variety of sensors – ultrasonic, camera, RADAR (radio detection and ranging), LIDAR (light detection and ranging), GPS and IR (infrared) – that are used to recognize signs, people, animals, other vehicles... » read more

System Bits: April 11
By Ann Mutschler - 11 Apr, 2017 - Comments: 0

Tiny transistors made from self-assembled carbon nanotubes While carbon nanotubes can be used to make very small electronic devices, they are difficult to handle. Now, researchers from the University of Groningen, the University of Wuppertal, and IBM Zurich, have developed a method to select semiconducting nanotubes from a solution, and make them self-assemble on a circuit of gold electrodes. ... » read more

The Week In Review: IoT
By Jeff Dorsch - 07 Apr, 2017 - Comments: 0

Mergers & Acquisitions Qualcomm reported that the waiting period under the Hart-Scott-Rodino Antitrust Improvements Act of 1976 expired on Monday, April 3, clearing the chip design company’s proposed $47 billion acquisition of NXP Semiconductors, at least in the eyes of U.S. antitrust regulators. Qualcomm expects to close the transaction, which will create an Internet of Things powerhouse, b... » read more

IoT Edge Design Demands A New Approach
By Jeff Miller - 23 Mar, 2017 - Comments: 0

A new breed of designers has arrived that is leveraging the advances in sensing technology to build the intelligent systems at the edge of the IoT. These systems play in every space: on your body, at home, the car or bus that you take to work, and the cities, factories, office buildings, or farms that you work. The energy that you consume and how you travel, by air, land, or sea, all have IoT e... » read more

Rapid SoC Proof-Of-Concept For Zero Cost
By Mentor, a Siemens Business - 22 Mar, 2017 - Comments: 0

A new breed of designers has arrived that is leveraging inexpensive sensors to build the intelligent systems at the edge of the Internet of Things (IoT). They work in small teams, collaborate online, and they expect affordable design tools that are easy to use in order to quickly produce results. Their goal is to deliver a functioning device to their stakeholders while spending as little money ... » read more

Defining The Edge Of IoT
By Jeff Miller - 02 Mar, 2017 - Comments: 0

“Life on the edge of IoT is where creativity knows no bounds.” Brian Derrick, Vice President Corporate Marketing and General Manager, Mentor Graphics. We are living in a remarkable time for electronic product design and development. In his blog post, Brian Derrick explores how the race to create the latest smartphones results in the availability of advanced, low-cost sensors, which has... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy