tag: SOI finFETs

What Will 7nm And 5nm Look Like?
By Mark LaPedus - 23 Jul, 2015 - Comments: 0

Citing an assortment of undisclosed manufacturing issues, Intel in July pushed out the introduction of its 10nm chip and process technology to the second half of 2017. This is roughly six or more months later than expected. With the delay at 10nm, [getentity id="22846" e_name="Intel"] also pushed out its process cadence from 2 to 2.5 years. Other foundries, meanwhile, are struggling to keep ... » read more

Issues And Options At 5nm
By Mark LaPedus - 19 Mar, 2015 - Comments: 0

While the foundries are ramping up their processes for the 16nm/14nm node, vendors are also busy developing technologies for 10nm and beyond. In fact, chipmakers are finalizing their 10nm process offerings, but they are still weighing the technology options for 7nm. And if that isn’t enough, IC makers are beginning to look at the options at 5nm and beyond. Today, chipmakers can see a p... » read more

Transistor Options Narrow For 7nm
By Mark LaPedus - 13 Nov, 2014 - Comments: 0

Chipmakers are currently ramping up silicon-based finFETs at the 16nm/14nm node, with plans to scale the same technology to 10nm. Now, the industry is focusing on the transistor options for 7nm and beyond. At one time, the leading contenders involved several next-generation transistor types. At present, the industry is narrowing down the options and one technology is taking a surprising lea... » read more

One-On-One: Mark Bohr
By Mark LaPedus - 18 Sep, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss process technology, transistor trends, chip-packaging and other topics with Mark Bohr, a senior fellow and director of process architecture and integration at Intel. SE: Intel recently introduced chips based on its new 14nm process. Can you briefly describe the 14nm process? Bohr: It’s our second-generation, tri-gate technology. So it has al... » read more

Will 7nm And 5nm Really Happen?
By Mark LaPedus - 14 Jul, 2014 - Comments: 2

Today’s silicon-based finFETs could run out of steam at 10nm. If or when chipmakers move beyond 10nm, IC vendors will require a new transistor architecture. III-V finFETs, gate-all-around FETs, quantum well finFETs, SOI finFETs and vertical nanowires are just a few of the future transistor candidates at 7nm and 5nm. Technically, it’s possible to manufacture the transistor portions of the... » read more

Will 7nm And 5nm Really Happen?
By Mark LaPedus - 19 Jun, 2014 - Comments: 11

As leading-edge chipmakers continue to ramp up their 28nm and 20nm devices, vendors are also updating their future technology roadmaps. In fact, IC makers are talking about their new shipment schedules for 10nm. And GlobalFoundries, Intel, Samsung and TSMC are narrowing down the options for 7nm, 5nm and beyond. There is a high probability that IC makers can scale to 10nm, but vendors face a ... » read more

The Search For The Next Transistor
By Mark LaPedus - 20 Feb, 2014 - Comments: 3

In the near term, the leading-edge chip roadmap looks fairly clear. Chips based on today’s finFETs and planar fully depleted silicon-on-insulator (FDSOI) technologies are expected to scale down to the 10nm node. But then, the CMOS roadmap becomes foggy at 7nm and beyond. The industry has been exploring a number of next-generation transistor candidates, but suddenly, a few technologies are ... » read more

What’s After 10nm?
By Mark LaPedus - 14 Nov, 2013 - Comments: 0

For some time, chipmakers have roughly doubled the transistor count at each node, while simultaneously cutting the cost by around 29%. IC scaling, in turn, enables faster and lower cost chips, which ultimately translates into cheaper electronic products with more functions. Consumers have grown accustomed to the benefits of Moore’s Law, but the question is for how much longer? Chips based ... » read more

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy