Powering CFETs From The Backside

By Katherine Derbyshire - 21 Mar, 2024 - Comments: 0

The first CMOS circuits to incorporate backside power connections are likely to be based on stacked nanosheet transistors, but further down the road, planners envision complementary transistors (CFETs) that vertically integrate stacked NFET and PFET devices. With at least twice the thickness of a nanosheet transistor, connecting CFETs to each other and to the rest of the circuit is likely to... » read more

Increasing eFPGA Density

By Ed Sperling - 24 Jun, 2020 - Comments: 0

How to boost embedded FPGA density to the point where it is competitive with traditional FPGAs, at a lower cost and faster turnaround time. Geoff Tate, CEO of Flex Logix, talks about the importance of interconnects and standard cells in adding flexibility into chips, and why eFPGAs are suddenly gaining attention. » read more

Cloud Characterization

By WeiLii Tan - 19 Dec, 2019 - Comments: 0

Library characterization is a compute-intensive task that takes days to weeks to complete. Runtimes for library characterization are increasing due to larger library sizes, higher number of operating conditions to characterize, as well as the need for statistical variation modeling in libraries at 22/20nm and smaller process nodes. Cloud platforms offer a way to accelerate library characterizat... » read more

eFPGA vs. FPGA Design Methodologies

By Ed Sperling - 05 Oct, 2018 - Comments: 0

Namit Varma, senior director of Achronix’s India Technology Center, discusses the differences between discrete and embedded FPGAs. https://youtu.be/Vwo3ktQvcKc » read more

How Semiconductor IP Became Critical To SoC Design

By Kilopass - 07 May, 2015 - Comments: 0

By Mark Templeton In 1991, I had the good fortune to be a member of the founding team of Artisan Components. We started the company believing that demand was about to appear for semiconductor intellectual property. We had a few data points. We knew that before a company could start a new chip project, they first had to design and verify all kinds of generic building blocks – things like ... » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: standard cells

Powering CFETs From The Backside

Increasing eFPGA Density

Cloud Characterization

eFPGA vs. FPGA Design Methodologies

How Semiconductor IP Became Critical To SoC Design