The Week In Review: Design

By Jesse Allen - 08 Sep, 2017 - Comments: 0

Tools Cadence unveiled an integrated memory design and verification tool, with environments for bitcell design, array and complier verification, and memory characterization. It utilizes existing simulation databases for multi-corner and Monte Carlo analysis, which the company says can lead to a 2X runtime improvement. Solido Design Automation uncorked PVTMC Verifier, which uses machine lear... » read more

Near-Threshold Computing

By Brian Bailey - 16 Jun, 2016 - Comments: 2

The emergence of the Internet of Things (IoT) has brought a lot of attention to the need for extremely low-power design, and this in turn has increased the pressure for voltage reduction. In the past, each new process node shrunk the feature size and lowered the nominal operating voltage. This resulted in a drop in power consumption. However, the situation changed at about 90nm in two ways. ... » read more

Moore Memory Problems

By Brian Bailey - 09 Jul, 2015 - Comments: 0

The six-transistor static memory cell (SRAM) has been the mainstay of on-chip memory for several decades and has stood the test of time. Today, many advanced SoCs have 50% of the chip area covered with these memories and so they are critical to continued scaling. “The SRAM being used in modern systems is similar to the SRAM they were using in the 1970s and 1980s,” says Duncan Bremner, ch... » read more

sureCore: ULP SRAM

By Ed Sperling - 04 Jan, 2015 - Comments: 0

Ultra-low-power technologies are suddenly very much in vogue. While three years ago it was almost impossible to raise venture funding in this space, it has become far easier in the past year as power becomes both a stumbling block and a competitive differentiator in the Internet of Things world. This is particularly true for wearable electronics such as multi-function watches. The ability to... » read more

Scaling The Lowly SRAM

By Mark LaPedus - 05 Jun, 2013 - Comments: 0

By Mark LaPedus Chipmakers face a multitude of challenges at the 20nm logic node and beyond, including the task of cramming more functions on the same chip without compromising on power and performance. There is one major challenge that is often overlooked in the equation—scaling the lowly static RAM (SRAM). In one key application, SRAM is the component used to make on-chip cache memories... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

tag: sureCore

The Week In Review: Design

Near-Threshold Computing

Moore Memory Problems

sureCore: ULP SRAM

Scaling The Lowly SRAM

Trending Articles

Baby Steps Toward 3D DRAM

What’s Next For Through-Silicon Vias

Chip Industry Week in Review

Strain, Stress In Advanced Packages Drives New Design Approaches

Navigating Increased Complexity In Advanced Packaging

Knowledge Centers
Entities, people and technologies explored