category: Blogs – MD

category: IoT, Security & Automotive

Multifunctional Materials Enable Single-Layer Temporary Bonding And Debonding
By Luke Prenger - 23 May, 2019 - Comments: 0

Many new wafer-level packaging (WLP) technologies involve the processing of thin wafers that must be mechanically supported during the manufacturing flow. These technologies include fan-out wafer-level packaging (FOWLP), fan-in wafer-level chip-scale packaging (FI-WLCSP), 3-D FOWLP, 2.5-D integration with interposer technology, and true 3-D IC integration using through-silicon via (TSV) interco... » read more

Q1 2019 Unit Drop Impacts Wafer Demand For 2019
By Joanne Itow - 23 May, 2019 - Comments: 0

The Semico Wafer Demand Model update for Q1 2019 now results in a 5.9% decline in wafer demand for 2019. Along with process technology and productivity, Semico’s Wafer Demand Model is highly dependent on semiconductor unit sales. In the Q1 2019, total semiconductor units dropped by 7.4% compared to Q4 2018 and 3.8% compared to Q1 2018. The drop in units is significant because of the broad spe... » read more

Small Critical Subsystems Suppliers Outperform In Downturns
By Julian West - 23 May, 2019 - Comments: 0

Clouds continue to persist over the semiconductor supply chain with little sign of lifting. In March, the decline in week-over-year chip sales appeared to be slowing, providing a glimmer of hope for the beginning of a new cycle. However, the recent rapid escalation of the tariff war between the U.S. and China heaped more uncertainty on the industry and visibility continues to remain low. Rev... » read more

New Imaging Tech Finds Buried Defects
By Shinsuke Mizuno - 23 May, 2019 - Comments: 0

By Shinsuke Mizuno and Vadim Kuchik Defects and contamination on the wafer can slow process development times and limit performance and yield. As chips get more complex, more defects can become buried within the increasing number of layers in the design. Finding and analyzing these buried defects is a major challenge for the industry, especially during the early learning cycles of new manufa... » read more

Renaissance In The Photomask Market?
By Lara Chamness - 08 May, 2019 - Comments: 0

The semiconductor industry has been on a roll for the past few years – and the rising tide has lifted segments spanning the supply chain. The photomask market, in particular, has seen exceptionally strong growth of 13 percent and 8 percent in 2017 and 2018, respectively. The upsurge is striking given that, in the early to mid-2000s, the photomask market averaged less than 4 percent annual gro... » read more

More Rare Earth Rumblings
By Mark LaPedus - 18 Apr, 2019 - Comments: 4

It’s time to look at the market for rare earths again. Rare earths are chemical elements found in the Earth’s crust. These elements, which are critical, are used in cars, consumer electronics, computers, communications, clean energy and defense systems. So why worry about them? China produces and controls 80% of the world’s rare earths. Other nations depend on China for these materi... » read more

Connecting Wafer-Level Parasitic Extraction And Netlisting
By Michael Hargrove - 18 Apr, 2019 - Comments: 0

The semiconductor technology simulation world is typically divided into device-level TCAD (technology CAD) and circuit-level compact modeling. Larger EDA companies provide high-level design simulation tools that perform LVS (layout vs. schematic), DRC (design rule checking), and many other software solutions that facilitate the entire design process at the most advanced technology nodes. In thi... » read more

New Plastics Can Speed Flexible Printed Electronics Development
By Tony Flaim - 18 Apr, 2019 - Comments: 0

Substrates play a huge role when designing any type of device, including printed and flexible electronics. From its compatibility with your printing process or with the inks and materials you’re using, to its thermal properties, the choice of substrate can have a significant impact on the effectiveness and manufacturability of your product. However, substrate material capabilities tend to ... » read more

Comparing New Memory Types
By Gill Lee - 18 Apr, 2019 - Comments: 0

After decades of research and development, three new types of memory—magnetic RAM (MRAM), phase change memory (PCRAM) and resistive RAM (ReRAM)—are moving toward commercial adoption, making this an exciting time for the semiconductor and computing industries. All three of these emerging memories are enabled by new materials and will require breakthroughs in process technology and manufactur... » read more

From Sand To Wafers
By Steve Proia - 18 Apr, 2019 - Comments: 1

More than most industries, ours is identified with a single element, silicon. Consider the self-adopted naming conventions of all the places that want to be recognized as members of the club—Silicon Valley, Silicon Beach, Silicon Forest and so on. Silicon wafers are fundamental in manufacturing the electronic “chips” that pervade almost every aspect of our lives. New applications in IoT, ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy