category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

Manufacturing Bits: Sept. 12
By Mark LaPedus - 12 Sep, 2017 - Comments: 0

Failure analysis for 2.5D/3D chips Imec has developed a new failure analysis method to localize interconnection failures in 2.5D/3D stack die with through-silicon vias (TSVs). This technique is called LICA, which stands for light-induced capacitance alteration. It addresses the reliability issues for 2.5D/3D devices in a non-destructive and cost-effective manner at the wafer level. For s... » read more

Survey: Optimism Grows for EUV
By Mark LaPedus - 11 Sep, 2017 - Comments: 1

The optimism is growing for extreme ultraviolet (EUV) lithography in the market, according to a pair of new surveys released by the eBeam Initiative, which also revealed some new and surprising data about mask writing tools and other photomask technology. In one of the surveys from the [getentity id="22818" e_name="eBeam Initiative"], respondents revealed that they are more optimistic than e... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 08 Sep, 2017 - Comments: 1

Chipmakers Toshiba is still looking for a buyer for its prized NAND flash memory business. The leading contenders for the business are a consortium with Western Digital. Meanwhile, Toshiba’s memory unit is expanding its Fab 6 facility at its Yokkaichi Operations, based in Japan. And now, it has selected a site for its next fab in Japan, this time in Kitakami City, Iwate. Construction is expe... » read more

Getting Ready For EUV
By Jan Willis - 06 Sep, 2017 - Comments: 0

The highly anticipated introduction of extreme ultra-violet (EUV) lithography is reflected in recent surveys conducted by the eBeam Initiative, which will be presented on Sept. 11 at the annual Photomask Technology Symposium in Monterey, Calif.  There are many changes are coming to the mask industry, in addition to EUV. Those include greater use of inverse-lithography technologies (ILT) and... » read more

Manufacturing Bits: Sept. 5
By Mark LaPedus - 05 Sep, 2017 - Comments: 0

Laser-magnet metrology The FELIX Laboratory and the High Field Magnet Laboratory (HFML) have recently conducted the first measurements that combine a free electron laser (FEL) with a powerful magnet. The combination enables researchers to explore the electronic properties of materials. It provides a way to perform terahertz (THz) magneto spectroscopy on samples. The FELIX Laboratory at R... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 01 Sep, 2017 - Comments: 0

Fab tools In a move to expand its product portfolio, Lam Research has acquired Coventor, a provider of simulation and modeling solutions for the semiconductor and MEMS industries. Lam Research held an analyst event at the recent Flash Memory Summit. The topics included 3D NAND and other technologies. In a blog, here’s what executives from Lam said at the event. Analysts from RBC Cap... » read more

Lam Research Acquires Coventor
By Mark LaPedus - 31 Aug, 2017 - Comments: 0

In a move to expand its product portfolio, Lam Research has acquired Coventor, a provider of simulation and modeling solutions for the semiconductor and MEMS industries. With the acquisition of Coventor, fab tool vendor Lam enters the simulation and modeling technology market. Coventor sells the so-called SEMulator3D modeling and analysis platform, which simulates a fab process flow. The “... » read more

Manufacturing Bits: Aug. 29
By Mark LaPedus - 29 Aug, 2017 - Comments: 2

Compact synchrotron EUV sources For some time, the industry has been exploring the development of next-generation power sources for extreme ultraviolet (EUV) lithography. ASML and Gigaphoton are separately developing EUV sources based on the more traditional and compact laser-produced-plasma (LPP) technology. Then, in R&D, others are exploring the development of futuristic EUV sources us... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 25 Aug, 2017 - Comments: 0

Packaging and test IoT chip startup zGlue recently announced its technology, dubbed the zGlue Integrated Platform (ZiP). In ZiP, chip customers select and configure their designs based on chiplets. Chiplets are proven silicon IP from existing vendors. Then, the technology automatically generates potential implementations of a design. As part of the effort, zGlue has selected Advanced Semicondu... » read more

Four Foundries Back MRAM
By Mark LaPedus - 23 Aug, 2017 - Comments: 4

Four major foundries plan to offer MRAM as an embedded memory solution by this year or next, setting the stage for what finally could prove to be a game-changer for this next-generation memory technology. GlobalFoundries, Samsung, TSMC and UMC plan to start offering spin-transfer torque magnetoresistive RAM (ST-MRAM or STT-MRAM) as an alternative or a replacement to NOR flash, possibly start... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy