category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

Next EUV Challenge: Pellicles
By Mark LaPedus - 27 Apr, 2016 - Comments: 1

Extreme ultraviolet (EUV) lithography is still not ready for high-volume manufacturing, but the technology is at least moving in the right direction. Both the [gettech id="31045" comment="EUV"] light source and resists are making noticeable progress, even though there are still challenges in the arena. And then, there is the EUV mask infrastructure, which also has some gaps. “When EUV i... » read more

Manufacturing Bits: April 26
By Mark LaPedus - 26 Apr, 2016 - Comments: 0

Multi-beam inspection For some time, Singaporean startup Maglen has been developing a multi-beam e-beam inspection tool technology. Now, Maglen has reached two milestones. First, it has devised a full column test stand. The test stand includes a mechanical column and software. The second milestone is also significant. “We also dropped our beam and obtained our very first images,” sai... » read more

10nm Versus 7nm
By Mark LaPedus - 25 Apr, 2016 - Comments: 20

The silicon foundry business is heating up, as vendors continue to ramp their 16nm/14nm finFET processes. At the same time, they are racing each other to ship the next technologies on the roadmap—10nm and 7nm. But the landscape is complicated, with each vendor taking a different strategy. [getentity id="22865" e_name="Samsung"], for one, plans to ship its 10nm [getkc id="185" kc_name="fi... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 22 Apr, 2016 - Comments: 0

Chipmakers As reported, Samsung is expanding its efforts in the foundry business, a move that will put the company on a collision course with TSMC and others. Samsung's foundry unit is expanding is logic portfolio and moving into the specialty foundry front. It will also make its advanced packaging technology available, such as 2.5D interposers, to customers. In a blog, Samsung said it plans t... » read more

The Big Race
By Ed Sperling - 21 Apr, 2016 - Comments: 0

An estimated 74.39 million automobiles are forecast to be sold this year, according to Statista. That's up about 2.8% over 2015, which on the surface doesn't look like fabulous growth. What isn't apparent in the numbers, though, is the amount and type of semiconductor content. Electronic control units, which are primarily driven by MCUs, increasingly are being replaced by SoCs. Automotive co... » read more

7nm Fab Challenges
By Mark LaPedus - 21 Apr, 2016 - Comments: 3

Leading-edge foundry vendors have made the challenging transition from traditional planar processes into the finFET transistor era. The first [getkc id="185" kc_name="finFETs"] were based on the 22nm node, and now the industry is ramping up 16nm/14nm technologies. Going forward, the question is how far the finFET can be scaled. In fact, 10nm finFETs from Samsung are expected to ramp by ye... » read more

Foundries Expand Their Scope
By Ed Sperling - 21 Apr, 2016 - Comments: 0

By Ed Sperling & Mark LaPedus Major foundries are stepping up their offerings across a wide swath of technology nodes, specialty processes and advanced packaging—a recognition that end markets are fragmenting and that the path forward includes a mix of new and established processes. As the smart phone market flattens, there is no single "next big thing" to drive volume at the most ... » read more

Improving Transistor Reliability
By Katherine Derbyshire - 21 Apr, 2016 - Comments: 1

One of the more important challenges in reliability testing and simulation is the duty cycle dependence of degradation mechanisms such as negative bias temperature instability ([getkc id="278" kc_name="NBTI"]) and hot carrier injection (HCI). For example, as previously discussed, both the shift due to NBTI and the recovery of baseline behavior are very dependent on device workload. This is ... » read more

Modeling Semiconductor Process Variation
By Coventor - 21 Apr, 2016 - Comments: 0

3D semiconductors, 3D NAND Flash, FinFETS and other advanced devices are bringing tremendous opportunities to the semiconductor industry. Unfortunately, these devices are also bringing new design, process and production problems. Process variability has been a major contributor to production delays as feature sizes have decreased and process complexity has increased. Virtual fabrication is a co... » read more

Cadence CDNLive Keynote Address: Thoughts and Implications
By Rich Wawrzyniak - 21 Apr, 2016 - Comments: 0

I attended the Cadence CDNLive conference at the Santa Clara Convention Center on April 5 and 6 and had a chance to listen to four very thought-provoking presentations given by the speakers. These presentations were combined to follow the keynote address given by Cadence CEO, Lip-Bu Tan and addressed several different aspects of the current semiconductor industry landscape. Speakers Lip-... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy