category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

Week In Review: Manufacturing, Test
By Mark LaPedus - 09 Jul, 2021 - Comments: 0

Chipmakers and OEMs China has been working on compound semiconductors, such as gallium-nitride (GaN) and silicon carbide (SiC). Now, a China-backed company has taken a big step in the SiC and related markets. Chip supplier Nexperia, a subsidiary of China’s Wingtech Technology, has acquired Newport Wafer Fab (NWF), a U.K.-based manufacture of power and compound semiconductors, including Si... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 02 Jul, 2021 - Comments: 0

Chipmakers and OEMs More delays and product woes at Intel. “INTC disclosed that it is delaying the launch of its next-generation Xeon server processor Sapphire Rapids (10nm) from the end of this year to 1Q22 due to additional validation needed for the chip,” said John Vinh, an analyst at KeyBanc, in a research note. “Production is expected to begin in 1Q22, with the ramp expected to begi... » read more

Manufacturing Bits: June 29
By Mark LaPedus - 29 Jun, 2021 - Comments: 0

Speeding up ALD with AI The U.S. Department of Energy’s (DOE) Argonne National Laboratory has developed various ways to make atomic layer deposition (ALD) more efficient by using artificial intelligence (AI). ALD is a deposition technique that deposits materials one layer at a time on chips. For years, ALD has been used for the production of DRAMs, logic devices and other products. In ... » read more

Week In Review: Manufacturing, Test
By Ed Sperling - 25 Jun, 2021 - Comments: 0

Lots more fabs and capacity The chip industry sees opportunity in shortages, and is racing to meet demand. SEMI reports 19 new worldwide high-volume fabs already have started construction, or will start by end of this year, and another 10 are scheduled in 2022. “Equipment spending for these 29 fabs is expected to surpass $140 billion over the next few years as the industry pushes to addre... » read more

Bumps Vs. Hybrid Bonding For Advanced Packaging
By Mark LaPedus - 23 Jun, 2021 - Comments: 3

Advanced packaging continues to gain steam, but now customers must decide whether to design their next high-end packages using existing interconnect schemes or move to a next-generation, higher-density technology called copper hybrid bonding. The decision is far from simple, and in some cases both technologies may be used. Each technology adds new capabilities in next-generation advanced pac... » read more

Manufacturing Bits: June 22
By Mark LaPedus - 22 Jun, 2021 - Comments: 1

5G metasurface antennas At the recent 2021 IEEE 71st Electronic Components and Technology Conference (ECTC), the Institute of Microelectronics of the Chinese Academy of Sciences (CAS) presented a paper on a low-profile broadband metasurface antenna for 5G antenna-in-package applications. The National Center for Advanced Packaging and the University of Chinese Academy of Sciences also contri... » read more

Thinner Channels With 2D Semiconductors
By Katherine Derbyshire - 21 Jun, 2021 - Comments: 0

Moving to future nodes will require more than just smaller features. At 3/2nm and beyond, new materials are likely to be added, but which ones and exactly when will depend upon an explosion of material science research underway at universities and companies around the globe. With field-effect transistors, a voltage applied to the gate creates an electric field in the channel, bending the ban... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 18 Jun, 2021 - Comments: 0

Fab tools TEL plans to ship its leading-edge coater/developer system to the joint Imec-ASML research lab, which is working on high-NA extreme ultraviolet (EUV) lithography. The equipment will be integrated with the EXE:5000, ASML’s next-generation high-NA EUV lithography system. The 0.55 numerical aperture (NA) tool is slated to be operational in 2023. Today's EUV is in production, but there... » read more

Fan-Out Packaging Options Grow
By Mark LaPedus - 17 Jun, 2021 - Comments: 0

Chipmakers, OSATs and R&D organizations are developing the next wave of fan-out packages for a range of applications, but sorting out the new options and finding the right solution is proving to be a challenge. Fan-out is a way to assemble one or more dies in an advanced package, enabling chips with better performance and more I/Os for applications like computing, IoT, networking and sma... » read more

More Fabs Seen In Chip Boom
By Mark LaPedus - 17 Jun, 2021 - Comments: 0

Over the last year, the semiconductor industry has seen an amazing turnaround. The industry happens to be in a boom cycle. Today, chip demand remains strong. And some fab projects have been accelerated to meet this demand, according to Christian Dieseldorff, an analyst at SEMI. It wasn’t always this way. In early 2020, the business looked bright, but the IC market dropped amid the Covid... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy