category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

Week In Review: Manufacturing, Test
By Mark LaPedus - 27 Nov, 2020 - Comments: 0

Market research VLSI Research has raised its forecast for semiconductors and fab equipment in 2020. In its previous forecast, VLSI Research projected that the equipment market would reach $84.8 billion in 2020, up 10.1% over 2019. Now, in its latest forecast (See page 2), the equipment market is projected to hit $89.8 billion in 2020, up 16.6%. “The equipment business is booming,” said ... » read more

Manufacturing Bits: Nov. 25
By Mark LaPedus - 25 Nov, 2020 - Comments: 0

Lidar-on-a-chip At the upcoming IEEE International Electron Devices Meeting (IEDM), Samsung will present a paper on the industry’s first single-chip lidar beam scanner. (Go to this link and then look for paper 7.2, “Single-Chip Beam Scanner with Integrated Light Source for Real-Time Light Detection and Ranging,” J. Lee et al, Samsung.) Lidar, or light imaging, detection, and ranging, ... » read more

Structural Integrity Of Chips
By Ed Sperling - 23 Nov, 2020 - Comments: 0

A new challenge is on the horizon, and it's one that could have some interesting consequences for chip design — structural integrity. Ever since the introduction of finFETs and 3D NAND, the lines have been blurring between electrical and mechanical engineering. After some initial reports of fins collapsing or breaking, and variable distances between layers, chipmakers figured out how to so... » read more

Accelerating Dry Etch Processes During Feature Dependent Etch
By Timothy Yang - 23 Nov, 2020 - Comments: 0

In dry etching, the trajectory of accelerated ions is non-uniform and non-vertical, due to collisions with gas molecules and other random thermal effects (figure 1). This has an impact on etch results, since the etch rate at any point on the wafer will vary depending on the solid angle visible to the bulk chamber and the ion flux for that angular range. These non-uniform and feature dependent e... » read more

Emerging Apps And Challenges For Packaging
By Mark LaPedus - 23 Nov, 2020 - Comments: 0

Advanced packaging is playing a bigger role and becoming a more viable option to develop new system-level chip designs, but it also presents chipmakers with a confusing array of options and sometimes a hefty price tag. Automotive, servers, smartphones and other systems have embraced advanced packaging in one form or another. For other applications, it's overkill, and a simpler commodity pack... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 20 Nov, 2020 - Comments: 0

Fab tools PDF Solutions has entered into a definitive agreement to acquire Cimetrix. Under the terms, PDF will pay a cash amount of $35.0 million, net of cash on Cimetrix’s balance sheet as of closing, and subject to other closing adjustments. With the move, PDF will expand into new markets. Cimetrix is a provider of equipment connectivity products for smart manufacturing and Industry 4.0... » read more

Upturn Seen For Silicon Wafer Market
By Mark LaPedus - 19 Nov, 2020 - Comments: 0

After a downturn in 2019, the silicon wafer market is expected to rebound in 2020. 2021 looks even better for silicon wafers. Silicon wafers are a fundamental part of the semiconductor business. Every chipmaker needs to buy them in one size or another. Silicon wafer vendors produce and sell bare or raw silicon wafers to chipmakers, who in turn process them into chips. The silicon wafer ma... » read more

The Ten Commandments Of Packaging
By Sam Sadri - 19 Nov, 2020 - Comments: 0

Semiconductor packaging continues to evolve as chipmakers find new ways to fit more functionality into smaller spaces. Whereas the package once served primarily as a means of attaching a chip to a circuit board and protecting it from damage due to heat, moisture, etc., packaging today plays an important role in adding value to the device, boosting customization while helping to reduce costs. ... » read more

EUV Challenges And Unknowns At 3nm and Below
By Mark LaPedus - 19 Nov, 2020 - Comments: 1

The chip industry is preparing for the next phase of extreme ultraviolet (EUV) lithography at 3nm and beyond, but the challenges and unknowns continue to pile up. In R&D, vendors are working on an assortment of new EUV technologies, such as scanners, resists, and masks. These will be necessary to reach future process nodes, but they are more complex and expensive than the current EUV pro... » read more

Taking Advantage Of Outsourced Test Services
By Vineet Pancholi - 19 Nov, 2020 - Comments: 0

The business model in today’s competitive world of commerce has shifted over recent years to “services.” Companies like Microsoft, Amazon and Google are prime success stories that have advanced the industry with business-enabling services. These economic productivity improvement services allow their customers to focus on product architecture, design and quick time to market. The service p... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy