tag: 2.5D

EDA On Board With New Package Options
By Ann Mutschler - 22 Jul, 2020 - Comments: 2

A groundswell of activity around multi-die integration and advanced packaging is pushing EDA companies to develop integration strategies that speed up time to sign-off, increase confidence that a design will work as expected, while still leaving enough room for highly customized solutions. Challenges range from how to architect a design, how to explore the best options and configurations, ho... » read more

Advanced Packaging Makes Testing More Complex
By Bryon Moyer - 07 Jul, 2020 - Comments: 1

The limits of monolithic integration, together with advances in chip interconnect and packaging technologies, have spurred the growth of heterogeneous advanced packaging where multiple dies are co-packaged using 2.5D and 3D approaches. But this also raises complex test challenges, which are driving new standards and approaches to advanced-package testing. While many of the showstopper issues... » read more

Manufacturing Bits: June 30
By Mark LaPedus - 30 Jun, 2020 - Comments: 0

1μm pitch wafer bonding At the recent IEEE Electronic Components and Technology Conference (ECTC), Imec presented a paper on a fine-pitch hybrid wafer-to-wafer bonding technology for heterogeneous integration. Imec described a way to enable hybrid bond pitches down to 1μm using a novel Cu/SiCN (copper/silicon-carbon-nitrogen) surface topography. Today, the industry is developing or shi... » read more

Aging Problems At 5nm And Below
By Brian Bailey - 11 Jun, 2020 - Comments: 3

The mechanisms that cause aging in semiconductors have been known for a long time, but the concept did not concern most people because the expected lifetime of parts was far longer than their intended deployment in the field. In a short period of time, all of that has changed. As device geometries have become smaller, the issue has become more significant. At 5nm, it becomes an essential par... » read more

Making Silicon Photonics Chips More Reliable
By Ed Sperling - 09 Jun, 2020 - Comments: 0

Silicon photonics has the ability to dramatically improve on-die and chip-to-chip communication within a package at extremely low power, but ensuring that signal integrity remains consistent over time isn't so simple. While this technology has been used commercially for at least the past decade, it never has achieved mainstream status. That's mostly due to the fact that Moore's Law scaling h... » read more

Ensuring HBM Reliability
By Ed Sperling - 27 May, 2020 - Comments: 0

Igor Elkanovich, CTO of GUC, and Evelyn Landman, CTO of proteanTecs, talk with Semiconductor Engineering about difficulties that crop up in advanced packaging, what’s redundant and what is not when using high-bandwidth memory, and how continuous in-circuit monitoring can identify potential problems before they happen. » read more

The Good And Bad Of Chiplets
By Mark LaPedus - 27 May, 2020 - Comments: 1

The chiplet model continues to gain traction in the market, but there are still some challenges to enable broader support for the technology. AMD, Intel, TSMC, Marvell and a few others have developed or demonstrated devices using chiplets, which is an alternative way to develop an advanced design. Beyond that, however, the adoption of chiplets is limited in the industry due to ecosystem issu... » read more

Rising Packaging Complexity
By Ed Sperling - 19 May, 2020 - Comments: 1

Synopsys’ Rita Horner looks at the design side of advanced packaging, including how tools are chosen today, what considerations are needed for integrating IP while maintaining low latency and low power, why this is more complex in some ways than even the most advanced planar chip designs, and what’s still missing from the tool flow. » read more

‘More Than Moore’ Reality Check
By Ann Mutschler - 14 May, 2020 - Comments: 1

The semiconductor industry is embracing multi-die packages as feature scaling hits the limits of physics, but how to get there with the least amount of pain and at the lowest cost is a work in progress. Gaps remain in tooling and methodologies, interconnect standards are still being developed, and there are so many implementations of packaging that the number of choices is often overwhelming. ... » read more

Power Becomes Bigger Concern For Embedded Processors
By Ann Mutschler - 15 Apr, 2020 - Comments: 0

Power is emerging as the dominant concern for embedded processors even in applications where performance is billed as the top design criteria. This is happening regardless of the end application or the process node. In some high-performance applications, power density and thermal dissipation can limit how fast a processor can run. This is compounded by concerns about cyber and physical secur... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy