Where Are The IoT Industry Standards?

By Jeff Dorsch - 10 Oct, 2016 - Comments: 0

Are you ready for some Internet of Things standards? Good, because you can help make them. The IoT is proceeding apace as a business, eagerly embraced by such corporate behemoths as Cisco Systems, General Electric, IBM, and Verizon Communications. What’s lacking is the codification of industry standards for the IoT, as many companies have aligned with groups that have competing agendas and... » read more

What’s Important For IoT—Power, Performance Or Integration?

By Ed Sperling - 01 Sep, 2016 - Comments: 0

Semiconductor Engineering sat down with Steve Hardin, director of product development for AT&T's IoT Solutions Group; Wayne Dai, CEO of VeriSilicon; John Koeter, vice president of the Solutions Group at [getentity id="22035" e_name="Synopsys"]; and Rajeev Rajan, vice president for IoT at [getentity id="22819" comment="GlobalFoundries"]. What follows are excerpts of that conversation. To vie... » read more

Preparing For 5G

By Jeff Dorsch - 09 Aug, 2016 - Comments: 0

If you like 4G LTE, you’re going to love 5G. The next-generation wireless communications technology will offer faster data transmission speeds and lower latency, providing the processing power to drive augmented-reality and virtual-reality applications for mobile devices and dedicated headsets. There is a caveat, though. The world needs to develop a consensus on what the 5G spectrum wil... » read more

RF GaN Gains Steam

By Mark LaPedus - 25 Jul, 2016 - Comments: 0

The RF [getkc id="217" kc_name="gallium nitride"] (GaN) device market is heating up amid the need for more performance with better power densities in a range of systems, such as infrastructure equipment, missile defense and radar. On one front, for example, RF GaN is beginning to displace a silicon-based technology for the power amplifier sockets in today’s wireless base stations. GaN is m... » read more

5 Takeaways From Semicon

By Mark LaPedus - 21 Jul, 2016 - Comments: 0

As usual, the recent Semicon West trade show was a busy, if not an overwhelming, event. The event, which took place in San Francisco in early July, featured presentations on the usual subjects in the semiconductor and IC-equipment sectors. There were sessions on 200mm, next-generation processes, transistors, lithography, MEMS and many others. In no particular order, here are my five ta... » read more

How Will 5G Work?

By Mark LaPedus - 23 Jun, 2016 - Comments: 0

Sumit Tomar, general manager of the Wireless Infrastructure Products Group at RF chip giant Qorvo, sat down with Semiconductor Engineering to discuss the development of next-generation 5G wireless networks and other topics. In 2014, RF Micro Devices and TriQuint merged to form Qorvo. What follows are excerpts of that conversation. SE: 5G, the follow-on to the current wireless standard known ... » read more

Waiting For 5G Technology

By Mark LaPedus - 23 Jun, 2016 - Comments: 1

For some time, carriers, equipment OEMs and chipmakers have been gearing up for the next-generation wireless standard called 5th generation mobile networks, or 5G. 5G is the follow-on to the current wireless standard known as 4G, or long-term evolution (LTE). It will enable data transmission rates of more than 10Gbps, or 100 times the throughput of LTE. But the big question is whether 5G wil... » read more

Plotting The Next Semiconductor Road Map

By Ed Sperling - 13 Jun, 2016 - Comments: 0

The semiconductor industry is retrenching around new technologies and markets as Moore's Law becomes harder to sustain and growth rates in smart phones continue to flatten. In the past, it was a sure bet that pushing to the next process node would provide improvements in power, performance and cost. But after 22nm, the economics change due to the need for multi-patterning and finFETs, and th... » read more

IoT Designs Evolving

By Ed Sperling - 02 Jun, 2016 - Comments: 0

IoT hardware is beginning to take shape across a variety of vertical markets, and devices are looking far different from the initial concepts. They're smarter, more targeted, and in most cases custom-built for specific applications. The concept of connected things is hardly a new one. Students at Carnegie Mellon University added sensors into a vending machine in the early 1980s to remotely m... » read more

What’s The Outlook For ICs?

By Mark LaPedus - 19 May, 2016 - Comments: 1

As the semiconductor industry heads into the second half of 2016, it’s time to take the pulse of the IC sector. Based on the current signs, there’s a faint pulse, if that. Simply put, the IC market has been in the doldrums in the first half of 2016. And it looks sluggish heading into the second half. It wasn’t supposed to be like this. At the beginning of this year, many predicte... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

Legacy Process Nodes Going Strong

The critical, and growing, significance of mature node chips and processes.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

tag: 5G