Transferring Skills Getting Harder


Rising complexity in developing chips at advanced nodes, and an almost perpetual barrage of new engineering challenges at each new node, are making it more difficult for everyone involved to maintain consistent skill levels across a growing number of interrelated technologies. The result is that engineers are being forced to specialize, but when they work with other engineers with different ... » read more

Inside Photomask Writing


Hirokazu Yamada, a board member and the director of the Mask Lithography Division of NuFlare, sat down with Semiconductor Engineering to discuss photomask technology, e-beam mask writer trends and other topics. NuFlare is the world’s largest supplier of e-beam mask writers. What follows are excerpts of that conversation. SE: How does the [getkc id="265" kc_name="photomask"] market look in... » read more

TSMC: 10nm To Be Greater Than 10% Of 2017 Wafer Revenue


TSMC’s financial results for the 4th Quarter of 2016 were released on January 11, 2017 (PST) and showed that year-over-year fourth quarter revenue increased 28.8% and simultaneously net income and diluted EPS both increased 37.6%.  In U.S. dollars, TSMC’s fourth quarter revenue was $8.25 billion. TSMC's CFO, Ms. Lora Ho, reported that 2016 was a good year for TSMC and that the company set ... » read more

Foundries See Mixed Future


Amid a tumultuous business environment, the silicon foundry industry is projected to see steady growth in a number of process segments in 2017. As in past years, the foundry market is expected to grow faster than the overall IC industry in 2017. But at the same time, the IC industry—the foundry customer base—continues to witness a frenetic wave of merger and acquisition activity. Basical... » read more

Uncertainty Grows For 5nm, 3nm


As several chipmakers ramp up their 10nm finFET processes, with 7nm just around the corner, R&D has begun for 5nm and beyond. In fact, some are already moving full speed ahead in the arena. [getentity id="22586" comment="TSMC"] recently announced plans to build a new fab in Taiwan at a cost of $15.7 billion. The proposed fab is targeted to manufacture TSMC’s 5nm and 3nm processes, whic... » read more

Etching Technology Advances


Let’s get really, really small. That directive from leading semiconductor companies and their customers is forcing the whole semiconductor supply chain to come up with new ways to design and manufacture ever-shrinking dimensions for chips. The current push is to 10nm and 7nm, but R&D into 5nm and 3nm is already underway. To put this in perspective, there are roughly two silicon atom... » read more

Inside Advanced Patterning


Prabu Raja, group vice president and general manager for the Patterning and Packaging Group at [getentity id="22817" e_name="Applied Materials"], sat down with Semiconductor Engineering to discuss the trends in patterning, selective processes and other topics. Raja is also a fellow at Applied Materials. What follows are excerpts of that conversion. SE: From your standpoint, what are the big... » read more

BEOL Barricades Ahead


Coventor recently assembled an expert panel at IEDM 2016, to discuss changes to BEOL process technology that would be needed to continue dimensional scaling to 7 nm and lower. Among the questions posed to panelists: What is BEOL? Where does it begin and end? Are there fundamental limits to interconnect processes? How much longer can we continue to use current interconnect processes and ... » read more

Multi-Patterning Issues At 7nm, 5nm


Continuing to rely on 193nm immersion lithography with multiple patterning is becoming much more difficult at 7nm and 5nm. With the help of various resolution enhancement techniques, optical lithography using a deep ultraviolet excimer laser has been the workhorse patterning technology in the fab since the early 1980s. It is so closely tied with the continuation of [getkc id="74" comment="Mo... » read more

And The Award Goes To…


I like to look at what users find the most interesting topics, not because it directly influences what I write, but to get a sense of the subjects that are on most people's minds. Some of it comes as no surprise. Content about new fabrication technologies tends to blow everything else away. While it directly affects very few of us, I think we all want to know the general direction of the indust... » read more

← Older posts Newer posts →