tag: 7nm

Will 5nm Happen?
By Mark LaPedus - 20 Jan, 2016 - Comments: 7

Chipmakers are ramping up their 16/14nm finFET processes, with 10nm finFETs expected to ship sometime in late 2016 or early 2017. So what’s next? The foundries can see a path to extend the finFET transistor to 7nm, but the next node, 5nm, is far from certain and may never happen. Indeed, there are several technical and economic challenges at 5nm. And even if 5nm happens, only a few compani... » read more

Reflections On 2015
By Brian Bailey - 10 Dec, 2015 - Comments: 0

It is easy to make predictions, but few people can make them with any degree of accuracy. Most of the time, those predictions are forgotten by the end of the year and there is no one to do a tally of who holds more credibility for next year. Not so with Semiconductor Engineering. We like to hold people's feet to the fire, but while the "Pants-On-Fire" meter may be applicable to politicians, we ... » read more

Measuring FinFETs Will Get Harder
By Mark LaPedus - 19 Nov, 2015 - Comments: 2

The industry is gradually migrating toward chips based on finFET transistors at 16nm/14nm and beyond, but manufacturing those finFETs is proving to be a daunting challenge in the fab. Patterning is the most difficult process for finFETs. But another process, metrology, is fast becoming one of the biggest challenges for the next-generation transistor technology. In fact, [getkc id="252" kc_n... » read more

More Choices, Less Certainty
By Ed Sperling - 04 Nov, 2015 - Comments: 3

The increasing cost of feature scaling is splintering the chip market, injecting uncertainty into a global supply chain that has been continually fine-tuned for decades. Those with deep enough resources and a clear need for density will likely follow Moore's Law, at least until 7nm. What comes after that will depend on a variety of factors ranging from available lithography—EUV, multi-bea... » read more

Increasing Challenges At Advanced Nodes
By Ed Sperling - 22 Oct, 2015 - Comments: 1

Gary Patton, chief technology officer at GlobalFoundries, sat down with Semiconductor Engineering to talk about new materials, stacked die, how far FD-SOI can be extended, and new directions for interconnects and transistors. What follows are excerpts of that conversation. SE: Where do you see problems at future nodes? Patton: At the device level, we have to be able to pattern these thing... » read more

Design Techniques Are Helping To Keep Moore’s Law Alive Longer
By Imec - 22 Oct, 2015 - Comments: 0

By Francky Catthoor Moore's Law means that electronic products can constantly be produced more cheaply, faster and more economically. Down to 45nm, this was due mainly to the technology that made it possible to reduce the size of transistors. Now things are becoming more difficult. But even if we are not able to achieve these gains through the further scaling of transistors as the result ... » read more

Taming Mask Metrology
By Mark LaPedus - 22 Oct, 2015 - Comments: 0

For years the IC industry has worried about a bevy of issues with the photomask. Mask costs are the top concern, but mask complexity, write times and defect inspection are the other key issues for both optical and EUV photomasks. Now, mask metrology, the science of measuring the key parameters on the mask, is becoming a new challenge. On this front, mask makers are concerned about the critic... » read more

What China Is Planning
By Mark LaPedus - 21 Oct, 2015 - Comments: 1

Over the years, China has unveiled several initiatives to advance its domestic semiconductor industry. China has made some progress at each turn, although every plan has fallen short of expectations. But now, the nation is embarking on several new and bold initiatives that could alter the IC landscape. China’s new initiatives address at least three key challenges for its IC industry: 1. C... » read more

Will The Chip Work?
By Ed Sperling - 19 Oct, 2015 - Comments: 1

IP is getting better, but the challenges of integrating it are getting worse. As the number of IP blocks in SoCs increases at each new process node, so does the difficulty of making them all work together. In some cases, this can mean extra code and a slight performance hit on power and performance. In other cases, it may require more drastic measures, ranging from a re-spin to a new archite... » read more

Executive Insight: Lip-Bu Tan
By Ed Sperling - 01 Oct, 2015 - Comments: 1

Lip-Bu Tan, president and CEO of Cadence, sat down with Semiconductor Engineering to talk about consolidation, Moore's Law, and where the opportunities are in the IoT and automotive markets. What follows are excerpts of that conversation. SE: What are the big concerns for the semiconductor industry in general, and EDA in particular? Tan: Top on my list is all the consolidation that's goin... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy