tag: 7nm

How To Extend Litho Scaling
By Ann Mutschler - 19 Feb, 2015 - Comments: 0

IC mask [getkc id="80" comment="lithography"] today is sophisticated and complex. It's also a work in progress with a lot of unknowns as the industry struggles to increase productivity while reducing risk. The bulk of the work currently is focused on trying to figure out what would be a practical scheme for patterning lithography that could be used at 10nm and 7nm, said Gandharv Bhatara, Ca... » read more

Will 10nm Be The Last Big Node?
By Ed Sperling - 19 Feb, 2015 - Comments: 0

There is a great deal of attention being paid to established nodes these days and everything up to and including 10nm. What comes after that remains a mystery. Intel and a handful of others will keep pushing to the next nodes, of course. Still, where the commercial foundries—including Intel—place their next big bets is a matter of ongoing debate. There is no doubt that 7nm and 5nm will b... » read more

One-On-One: Dave Hemker
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Dave Hemker, senior vice president and chief technology officer at [getentity id="22820" comment="LAM Research"]. SE: On the technology front, the IC industry is undergoing some new and dramatic changes. What are some of those changes? Hemker: We focus on what we call the inflections.... » read more

Still Waiting For III-V Chips
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

For years, chipmakers have been searching for an alternative material to replace traditional silicon in the channel for advanced CMOS devices at 7nm and beyond. There’s a good reason, too: At 7nm, silicon will likely run out of steam in the channel. Until recently, chipmakers were counting on III-V materials for the channels, at least for NFET. Compared to silicon, III-V materials provide ... » read more

Next Channel Materials?
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Chipmakers are making a giant leap from planar transistors to [getkc id="185" kc_name="finFETs"]. Initially, [getentity id="22846" e_name="Intel"] moved into finFET production at 22nm and is now ramping up its second-generation finFETs at 14nm. And the other foundries will enter the finFET fray at 16nm/14nm. So what’s next? Chipmakers will likely extend the finFET architecture to both 10nm... » read more

One-On-One: Aaron Thean
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Aaron Thean, vice president of process technologies and director of the logic devices R&D program at Imec. SE: Chipmakers are ramping up the 16nm/14nm logic node, with 10nm and 7nm in R&D. What’s the current timeline for 10nm and 7nm? Thean: 10nm is on its way. We will see r... » read more

Unraveling The Mysteries At IEDM
By Mark LaPedus - 19 Dec, 2014 - Comments: 0

In some respects, the 2014 IEEE International Electron Devices Meeting (IEDM) was no different than past events. The event, held this week in San Francisco, included the usual and dizzying array of tutorials, sessions, papers and panels. On the leading-edge CMOS front, for example, the topics included [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D IC"] chips, III-V materials, [getkc ... » read more

And the Winner is…
By Brian Bailey - 18 Dec, 2014 - Comments: 0

Semiconductor Engineering now has its first full year under its belt, and I have to say it has been an incredible year. Not only did we exceed a million page views in our first year, but we also got started on the Knowledge Center, an endeavor the likes of which has never been attempted in our industry. It is still very young and has a lot of growing up to do, but it is a wonderful start. We wo... » read more

Trouble Spots And Optimism For 2015
By Ed Sperling - 18 Dec, 2014 - Comments: 0

Most top executives in the semiconductor industry are bullish about 2015 and even beyond, particularly as the [getkc id="76" comment="Internet of Things"] begins to drive new markets and market mash-ups, and as more semiconductors find their way into markets such as automotive, health-care and manufacturing. But it's not an entirely rosy picture, and top executives point to potential trouble sp... » read more

What’s The Other Guy Doing?
By Ed Sperling - 11 Dec, 2014 - Comments: 0

Competition is generally a good thing. It improves service, promotes innovation, forces efficiencies and price cuts where necessary, and it ratchets up the pressure to bring products and services to market faster. Those who can't keep up usually lose market share, and eventually the business sector consolidates until something comes along to disrupt it. That cycle has been repeated in every ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy