Much Smarter Manufacturing

By Ed Sperling - 22 Oct, 2020 - Comments: 0

Smart manufacturing is undergoing some fundamental changes as more sensors are integrated across fabs to generate more usable data, and as AI/ML systems are deployed to sift through that data and identify patterns and anomalies more quickly. The concept of smart manufacturing — also referred to as Industrie 4.0 in Europe, for the fourth industrial revolution — emerged from the World Econ... » read more

Slower Metal Bogs Down SoC Performance

By Bryon Moyer - 15 Oct, 2020 - Comments: 0

Metal interconnect delays are rising, offsetting some of the gains from faster transistors at each successive process node. Older architectures were born in a time when compute time was the limiter. But with interconnects increasingly viewed as the limiter on advanced nodes, there’s an opportunity to rethink how we build systems-on-chips (SoCs). ”Interconnect delay is a fundamental tr... » read more

Searching For Power Bugs

By Brian Bailey - 15 Oct, 2020 - Comments: 0

How much power is your design meant to consume while performing a particular function? For many designs, getting this right may separate success from failure, but knowing that right number is not as easy as it sounds. Significant gaps remain between what power analysis may predict and what silicon consumes. As fast as known gaps are closed, new challenges and demands are being placed on the ... » read more

EDA, IP Show Surprising Strength

By Ed Sperling - 06 Oct, 2020 - Comments: 0

EDA and IP revenue surged 12.6% in Q2 to $2.78 billion, up from $2.47 billion in the same period in 2019, according to a just-released report. That growth occurred in all regions, as well. What's surprising about the report is just how strong sales were in the midst of the COVID-19 pandemic. "Revenue was up strongly from Q1, and there was enormous growth," said Wally Rhines, executive spo... » read more

112G SerDes Reliability

By Ed Sperling - 05 Oct, 2020 - Comments: 0

Priyank Shukla, product marketing manager at Synopsys, digs into 112Gbps SerDes, why it’s important to examine the performance of these devices in the context of a system, what is acceptable channel loss, and how density can affect performance, power and noise. » read more

Deals That Change The Chip Industry

By Ed Sperling - 28 Sep, 2020 - Comments: 0

Nvidia's pending $40 billion acquisition of Arm is expected to have a big impact on the chip world, but it will take years before the effects of this deal are fully understood. More such deals are expected over the next couple of years due to several factors — there is a fresh supply of startups with innovative technology, interest rates are low, and market caps and stock prices of buyers ... » read more

RISC-V: What’s Missing And Who’s Competing

By Ed Sperling - 23 Sep, 2020 - Comments: 0

Part 2: Semiconductor Engineering sat down to discuss the business and technology landscape for RISC-V with Zdenek Prikryl, CTO of Codasip; Helena Handschuh, a Rambus Security Technologies fellow; Louie De Luna, director of marketing at Aldec; Shubhodeep Roy Choudhury, CEO of Valtrix Systems; and Bipul Talukdar, North America director of applications engineering at SmartDV. What follows are exc... » read more

Custom Designs, Custom Problems

By Ed Sperling - 16 Sep, 2020 - Comments: 0

Semiconductor Engineering sat down to discuss power optimization with Oliver King, CTO at Moortec; João Geada, chief technologist at Ansys; Dino Toffolon, senior vice president of engineering at Synopsys; Bryan Bowyer, director of engineering at Mentor, a Siemens Business; Kiran Burli, senior director of marketing for Arm's Physical Design Group; Kam Kittrell, senior product management group d... » read more

Analog Chip Layout: Creativity Vs. Deadlines

By Benjamin Prautsch - 10 Sep, 2020 - Comments: 0

The entire design of integrated circuits, from the specification onward, depends on successful validation by measurement of microchips. One key milestone in this process is the completion of the layout. However, the path to reach this point can be quite difficult as many iterations are usually required. It includes: Iterations with the customer to finalize the specification. Iteratio... » read more

Optimizing For Energy In Physical Design

By Pierre-Alexandre Bou-Ach - 10 Sep, 2020 - Comments: 0

Energy is a precious resource, which should not be wasted. Energy drives economies and sustains societies. Predictions show that the energy of electronics may soon consume 20% to 33% of the global energy supply, as it is highlighted in this blog post about "Design and Manufacturing in 2030" from Greg Yeric, fellow at Arm. Energy efficiency is such an important global issue that it is ... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.