Week In Review: Manufacturing, Test

By Linda Christensen - 15 Apr, 2022 - Comments: 0

Photonic Chips Go Big In Europe PhotonDelta, a collaborative end-to-end supply chain for the application of photonics chips, secured €1.1 billion in conditional funding for a six-year initiative. Investments from the Netherlands government and other organizations “will be used to build 200 startups, scale up production, create new applications for photonic chips, and develop infrastructure... » read more

Strategies For Faster Yield Ramps On 5nm Chips

By Laura Peters - 12 Apr, 2022 - Comments: 0

Leading chipmakers TSMC and Samsung are producing 5nm devices in high volume production and TSMC is forging ahead with plans for first 3nm silicon by year end. But to meet such aggressive targets, engineers must identify defects and ramp yield faster than before. Getting a handle on EUV stochastic defects — non-repeating patterning defects such as microbridges, broken lines, or missing con... » read more

Extracting Intrinsic Mechanical Properties Of Thin Low-Dielectric Constant Materials With iTF Analysis

By Bruker - 12 Apr, 2022 - Comments: 0

This white paper focuses on the optimization and use of Bruker’s iTF software package for the extraction of intrinsic (substrate independent) mechanical properties, particularly for thin, low-k materials. These considerations are split into two main parts: Measurement procedure (Section II) and iTF execution (Section III). The former outlines important aspects of acquiring proper experimental... » read more

Week In Review: Manufacturing, Test

By Ed Sperling - 25 Mar, 2022 - Comments: 0

Worldwide fab equipment spending for front-end manufacturing is expected to hit $107 billion this year, an 18% year-over-year increase, according to SEMI’s latest World Fab Forecast report. “Crossing the $100 billion mark in spending on global fab equipment for the first time is a historic milestone for the semiconductor industry,” said Ajit Manocha, president and CEO of SEMI. Investme... » read more

Technical Paper Round-Up: March 22

By Linda Christensen - 22 Mar, 2022 - Comments: 0

New memories, materials, and transistor types, and processes for making those devices, highlighted the past week's technical papers. That includes everything from vertical MoS2 to programmable black phosphorus image sensors and photonic lift-off processes for flexible thin-film materials. Papers continue to flow from all parts of the supply chain, with some new studies out of Pakistan, Seoul... » read more

Highly Selective Etch Rolls Out For Next-Gen Chips

By Mark LaPedus - 21 Mar, 2022 - Comments: 0

Several etch vendors are starting to ship next-generation selective etch tools, paving the way for new memory and logic devices. Applied Materials was the first vendor to ship a next-gen selective etch system, sometimes called highly-selective etch, in 2016. Now, Lam Research, TEL, and others are shipping tools with highly-selective etch capabilities, in preparation for futuristic devices su... » read more

Extending Copper Interconnects To 2nm

By Laura Peters - 17 Mar, 2022 - Comments: 0

Transistor scaling is reaching a tipping point at 3nm, where nanosheet FETs will likely replace finFETs to meet performance, power, area, and cost (PPAC) goals. A significant architectural change is similarly being evaluated for copper interconnects at 2nm, a move that would reconfigure the way power is delivered to transistors. This approach relies on so-called buried power rails (BPRs) and... » read more

GaN ICs Wanted for Power, EV Markets

By Katherine Derbyshire - 17 Mar, 2022 - Comments: 0

Circuits built with discrete GaN components may get the job done, but fully integrated GaN circuits remain the ultimate goal because they would offer many of the same advantages as integrated silicon circuits. These benefits include lower cost as the circuit footprint is scaled, and reduced parasitic resistance and capacitance with shorter interconnect runs. In addition, improved device perf... » read more

2D materials for future heterogeneous electronics

By Technical Paper Link - 16 Mar, 2022 - Comments: 0

Abstract "Graphene and two-dimensional materials (2DM) remain an active field of research in science and engineering over 15 years after the first reports of 2DM. The vast amount of available data and the high performance of device demonstrators leave little doubt about the potential of 2DM for applications in electronics, photonics and sensing. So where are the integrated chips and enabled ... » read more

Survey: 2022 Deep Learning Applications

By eBeam Initiative - 16 Mar, 2022 - Comments: 0

The 2022 member list of deep learning projects and products that eBeam members are working on in photomask to wafer semiconductor manufacturing. Participating companies include Advantest, ASML, Canon, CEA-LETI, D2S, Fraunhofer IPMS, Hitachi High-Tech Corporation, imec, NuFlare Technology, Siemens Industries Software, Inc.; Siemens EDA, STMicroelectronics, and TASMIT. Click here to see the su... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

tag: imec

Week In Review: Manufacturing, Test

Strategies For Faster Yield Ramps On 5nm Chips

Extracting Intrinsic Mechanical Properties Of Thin Low-Dielectric Constant Materials With iTF Analysis

Week In Review: Manufacturing, Test

Technical Paper Round-Up: March 22

Highly Selective Etch Rolls Out For Next-Gen Chips

Extending Copper Interconnects To 2nm

GaN ICs Wanted for Power, EV Markets

2D materials for future heterogeneous electronics

Survey: 2022 Deep Learning Applications

Trending Articles

Is In-Memory Compute Still Alive?

Baby Steps Toward 3D DRAM

Chip Industry Week In Review

Chip Industry Week in Review

What’s Next For Through-Silicon Vias

Knowledge Centers
Entities, people and technologies explored