Inside Lithography And Masks

By Mark LaPedus - 05 Apr, 2017 - Comments: 3

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Gregory McIntyre, director of the Advanced Patterning Department at [getentity id="22217" e_name="Imec"]; Harry Levinson, senior fellow and senior director of technology research at [getentity id="22819" comment="GlobalFoundries"]; David Fried, chief technology officer at [getentity id="22210" e_name="Cove... » read more

Inside EUV Resists

By Mark LaPedus - 17 Nov, 2016 - Comments: 3

Andrew Grenville, chief executive of resist maker Inpria, sat down with Semiconductor Engineering to talk about photoresists for extreme ultraviolet (EUV) lithography. What follows are excerpts of that conversation. SE: Photoresists are a critical part of lithography. Resists are light-sensitive materials. They form patterns on a surface when exposed to light. For EUV, they are critical. Wha... » read more

EUV Resists Move Forward

By Katherine Derbyshire - 23 Mar, 2016 - Comments: 0

Improvements in EUV exposure sources and exposure tools are shifting the industry’s focus to other components of the lithography process. As noted last year, one of the key areas is photoresists. But advanced photoresists face significant challenges, due to the need to balance sensitivity, etch selectivity, and resolution. This year’s SPIE Advanced Lithography conference featured promis... » read more

Multi-Beam Market Heats Up

By Mark LaPedus - 17 Mar, 2016 - Comments: 3

The multi-beam e-beam mask writer business is heating up, as Intel and NuFlare have separately entered the emerging market. In one surprising move, [getentity id="22846" e_name="Intel"] is in the process of acquiring IMS Nanofabrication, a [gettech id="31058" t_name="multi-beam e-beam"] equipment vendor. And separately, e-beam giant NuFlare recently disclosed its new multi-beam mask writer t... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 04 Mar, 2016 - Comments: 0

Is robotics the next big thing? IDC forecasts that global spending on robotics and related services will grow at a compound annual growth rate (CAGR) of 17% from more than $71 billion in 2015 to $135.4 billion in 2019. "Robotics is one of the core technologies that is enabling significant change in manufacturing through factory of the future initiatives. While traditionally used in the automoti... » read more

The Next Resists…Continued

By Katherine Derbyshire - 17 Dec, 2015 - Comments: 1

As previously discussed, conventional chemically-amplified resists are struggling to balance the competing requirements of EUV lithography. Simultaneously meeting the industry’s targets for resolution, sensitivity, and line-edge roughness may require new resist concepts. Inpria’s resist technology, based on tin-oxide nano clusters, is one possibility. Recently published work at SUNY Albany ... » read more

The Next Resists

By Katherine Derbyshire - 22 Oct, 2015 - Comments: 5

As EUV exposure tools, sources, and photomasks have become more capable, the lithography sector’s attention has turned to EUV photoresist. After all, once the exposure system can produce a high quality image at the wafer, the resist still has to capture it for pattern transfer. Unfortunately, the increasing emphasis on photoresist has made the limitations of current formulations even more obv... » read more

5 Reasons EUV Will Or Won’t Be Used

By Michael Watts - 19 Mar, 2015 - Comments: 1

Digging into this subject, there are five metrics that count in a lithography tool: resolution, throughput, defects, overlay, and reliability. So what does the best data tell us about the current state and realistic prognosis for [gettech id="31045" comment="EUV"]. Semiconductor Engineering posed this question to Matt Colburn, senior manager for patterning research at [getentity id="22306" comm... » read more

Disruptive R&D

By Paula Doe - 17 Jul, 2014 - Comments: 0

Leading university researchers presented their most promising technologies — describing developments ranging from sustainable metal cluster technology (that’s already spawned three notable startups) to resonance-based detection for more accurate MEMS devices — at the new Breakthrough Research Technologies session and the Silicon Innovation Forum at SEMICON West 2014. OSU metal cluster... » read more

Week In Review: Manufacturing, Design, Test

By Mark LaPedus - 21 Feb, 2014 - Comments: 0

Reports have surfaced that IBM’s semiconductor unit is on the block, and there has been discussion about the reasons and the aftermath. Sources say there are at least two potential buyers for the unit—Samsung and TowerJazz. Apparently, the talks between IBM-Samsung and IBM-TowerJazz have been going on for some time. Multiple sources believe that Samsung is interested in buying IBM’s advan... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?