tag: Mentor

3D-ICs May Be The Least-Cost Option
By Brian Bailey - 30 Nov, 2023 - Comments: 1

When 2.5D and 3D packaging were first conceived, the general consensus was that only the largest semiconductor houses would be able to afford them, but development costs are quickly coming under control. In some cases, these advanced packages actually may turn out to be the lowest-cost options. With stacked die [1], each die is considered to be a complete functional block or sub-system. In t... » read more

Help, 3D-IC Is Stuck In A Country Song
By John Ferguson - 30 Nov, 2023 - Comments: 0

Every time I focus on three-dimensional (3D) integrated circuit (IC) design, I start hearing the Luke Bryan song “Rain Makes Corn, Corn Makes Whiskey.” Not because I need a strong drink to work with 3D-IC designs, but because there is a similar, although slightly more complicated, series of cause and effect issues that impact 3D-ICs. Pushing electrons through very thin metal wires and switc... » read more

Successful 3D-IC Design, Verification, And Analysis Requires An Integrated Approach
By Siemens EDA - 30 Nov, 2023 - Comments: 0

3D-IC designs enable improvements in performance, power, footprint, and costs that cannot be attained in system-on-chip (SoC) and IC design. However, the leap from traditional SoC/IC design to 3D-IC designs brings not only new opportunities, but also new challenges. Siemens EDA provides multiple 3D-IC design analysis and verification functionalities that address the diverse needs of 3DIC des... » read more

Making Heterogeneous Integration More Predictable
By Ed Sperling - 29 Nov, 2023 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss problems and potential solutions in heterogeneous integration with Dick Otte, president and CEO of Promex Industries; Mike Kelly, vice president of chiplets/FCBGA integration at Amkor Technology; Shekhar Kapoor, senior director of product management at Synopsys; John Park, product management group director in Cadence's Custom I... » read more

Blog Review: November 29
By Jesse Allen - 29 Nov, 2023 - Comments: 0

Siemens' Matt Walsh checks out electro-thermal design and how a Boundary Condition Independent Reduced Order Model (BCI-ROM) can capture accurate characteristics from a 3D thermal analysis, ready for use in a 1D circuit simulation. Cadence's Vinod Khera considers how EDA could benefit from the AI revolution by providing a productivity boost through virtual assistants and improving code quali... » read more

Autonomous Vehicles: Not Ready Yet
By John Koon - 27 Nov, 2023 - Comments: 0

The swirl of activity around L4 and L5 vehicles has yet to result in a successful demonstration of an autonomous vehicle that can navigate the streets of a city or highway without incident, and there is a growing body of real-world data showing that much work still needs to be done. Robo-taxi trials in big cities such as San Francisco, Los Angeles, and soon San Diego, are proving that autono... » read more

Chip Industry Week In Review
By The SE Staff - 22 Nov, 2023 - Comments: 0

By Jesse Allen, Susan Rambo, and Liz Allan The U.S. government will invest about $3 billion for the National Advanced Packaging Manufacturing Program (NAPMP), including an advanced packaging piloting facility to help U.S. manufacturers adopt new technology and workforce training programs. It also will provide funding for projects concentrating on materials and substrates; equipment, tools, ... » read more

Chip Industry Week In Review
By The SE Staff - 17 Nov, 2023 - Comments: 0

By Jesse Allen, Karen Heyman, and Liz Allan Japan's Rapidus and the University of Tokyo are teaming up with France's Leti to meet its previously announced mass production goal of 2nm chips by 2027, and chips in the 1nm range in the 2030s. Rapidus was formed in 2022 with the support of eight Japanese companies — Sony, Kioxia, Denso, NEC, NTT, SoftBank, Toyota, and Mitsubishi's banking arm, ... » read more

Blog Review: November 15
By Jesse Allen - 15 Nov, 2023 - Comments: 0

Cadence's Neelabh Singh explores the process of lane initialization and link training in bringing up a high-speed link in USB4. Synopsys' Shela Aboud argues that TCAD should be an integral part of an EDA flow as it enhances design technology co-optimization with a way to experiment and determine what works and what doesn’t work at different process nodes using physics-based models. Siem... » read more

What Can Go Wrong In Heterogeneous Integration
By Ed Sperling - 15 Nov, 2023 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss heterogeneous integration with Dick Otte, president and CEO of Promex Industries; Mike Kelly, vice president of chiplets/FCBGA integration at Amkor Technology; Shekhar Kapoor, senior director of product management at Synopsys; John Park, product management group director in Cadence's Custom IC & PCB Group; and Tony Mastroia... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy