Chip Industry Technical Paper Roundup: Mar. 11


New technical papers added to Semiconductor Engineering’s library this week. [table id=205 /] More ReadingTechnical Paper Library home » read more

Chip Industry Week In Review


By Adam Kovac, Karen Heyman, and Liz Allan. India approved the construction of two fabs and a packaging house, for a total investment of about $15.2 billion, according to multiple sources. One fab will be jointly owned by Tata and Taiwan's Powerchip. The second fab will be a joint investment between CG Power, Japan's Renesas Electronics, and Thailand's Stars Microelectronics. Tata will run t... » read more

The Benefits Of Curvilinear Full-Chip Inverse Lithography Technology With Mask-Wafer Co-Optimization 


A technical paper titled “Make the impossible possible: use variable-shaped beam mask writers and curvilinear full-chip inverse lithography technology for 193i contacts/vias with mask-wafer co-optimization” was published by researchers at D2S and Micron. Abstract: "Full-chip curvilinear inverse lithography technology (ILT) requires mask writers to write full reticle curvilinear mask patte... » read more

Make The Impossible Possible: Use Variable-Shaped Beam Mask Writers And Curvilinear Full-Chip Inverse Lithography Technology For 193i Contacts/Vias With Mask-Wafer Co-Optimization


Abstract: "Full-chip curvilinear inverse lithography technology (ILT) requires mask writers to write full reticle curvilinear mask patterns in a reasonable write time. We jointly study and present the benefits of a full-chip, curvilinear, stitchless ILT with mask-wafer co-optimization (MWCO) for variable-shaped beam (VSB) mask writers and validate its benefits on mask and wafer at Micron Tec... » read more

Why Chiplets Are So Critical In Automotive


Chiplets are gaining renewed attention in the automotive market, where increasing electrification and intense competition are forcing companies to accelerate their design and production schedules. Electrification has lit a fire under some of the biggest and best-known carmakers, which are struggling to remain competitive in the face of very short market windows and constantly changing requir... » read more

Money Pours Into New Fabs And Facilities


Fabs, packaging, test and assembly, and R&D all drew major funding in 2023. Companies poured money into offshore locations, such as India and Malaysia, to access a larger workforce and lower costs, while also partnering with governments to secure domestic supply chains amid ongoing geopolitical turmoil. Looking ahead, artificial intelligence (AI), quantum computing, and data applications... » read more

Industry Luminaries Highlight Opportunities For Advancing The Non-EUV Leading Edge


The eBeam Initiative’s 12th annual Luminaries survey in 2023 reported a range of nodes from >5nm to 14nm as the most advanced non-EUV nodes using 193i lithography. A panel of semiconductor photomask and lithography experts debated several of the survey results, including this one, to provide more insights behind the results. Aki Fujimura, CEO of D2S, Inc., the managing company sponsor of t... » read more

Chip Industry Week In Review


By Jesse Allen, Gregory Haley, and Liz Allan Synopsys acquired Imperas, pushing further into the RISC-V world with Imperas' virtual platform technology for verifying and emulating processors. Synopsys has been building up its RISC-V portfolio, starting with ARC-V processor IP and a full suite of tools introduced last month. The first high-NA EUV R&D center in the U.S. will be built at... » read more

Chip Industry Week In Review


By Jesse Allen, Gregory Haley, and Liz Allan Bosch, Infineon, and NXP were cleared in Germany to each acquire 10% of the European Semiconductor Manufacturing Co. (ESMC), established by TSMC, solidifying the supply chain against future shortages, particularly for automotive chips. “ESMC intends to build and operate another large semiconductor factory in Dresden, in which the three Europ... » read more

Rethinking Design, Workflow For 3D


In the 3D world, where NAND has hundreds of layers and packages come in intricate stacks, fresh graduates and veteran engineers alike are being confronted with design challenges that require a rethinking of both classic designs and traditional workflows, but without breaking the laws of physics. “There are pockets of things that have been on 3D for quite some time,” said Kenneth Larson, ... » read more

← Older posts Newer posts →