tag: Nordson

Gaps Emerge In Test And Analytics
By Ed Sperling - 10 Dec, 2019 - Comments: 0

Sensor and process drift, increased design complexity, and continued optimization of circuitry throughout its lifetime are driving test and analytics in new directions, requiring a series of base comparisons against which equipment and processes can be measured. In the design world this type of platform is called a digital twin, but in the test world there is no equivalent today. And as more... » read more

Planning For Panel-Level Fan-out
By Mark LaPedus - 21 Nov, 2019 - Comments: 0

Several companies are developing or ramping up panel-level fan-out packaging as a way to reduce the cost of advanced packaging. Wafer-level fan-out is one of several advanced packaging types where a package can incorporate dies, MEMS and passives in an IC package. This approach has been in production for years, and is produced in a round wafer format in 200mm or 300mm wafer sizes. Fan-out... » read more

Different Ways To Improve Chip Reliability
By Ed Sperling - 12 Nov, 2019 - Comments: 1

A push toward greater reliability in safety- and mission-critical applications is prompting some innovative approaches in semiconductor design, manufacturing, and post-production analysis of chip behavior. While quality over time has come under intensive scrutiny in automotive, where German carmakers require chips to last 18 years with zero defects, it isn't the only market demanding extende... » read more

Test In New Frontiers: Flexible Circuits
By Susan Rambo - 12 Nov, 2019 - Comments: 0

Test is becoming increasingly complicated as new technologies such as flexible electronics begin playing mission-critical roles in applications where electronics have little or no history. Although flexible circuitry has been around for while, testing needs to catch up as these circuits are deployed across a variety of markets where conditions may be extreme. In many cases, sensors for monit... » read more

CT Scanning Baseballs
By CyberOptics - 11 Nov, 2019 - Comments: 0

Climate change, manufacturing tolerances or design changes? What caused so many more home runs in professional baseball this year? CyberOptics will not be able to help you learn how climate change affected the home run statistics this year, but utilizing 3D industrial CT scanning could help identify changes in baseball design and manufacturing which may have contributed to a record spike in hom... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 25 Oct, 2019 - Comments: 0

Fab tools It’s been a tough period for memory. But is there now a sign of a rebound? For the September 2019 quarter, Lam Research reported revenue of $2.166 billion, and net income was $466 million, or $3.09 per diluted share on a U.S. GAAP basis. The outlook at Lam (LRCX) is a bright spot. “LRCX posted strong results and guidance, noting strength from logic and foundry in the December ... » read more

What’s The Best Advanced Packaging Option?
By Mark LaPedus - 17 Oct, 2019 - Comments: 2

As traditional chip designs become more unwieldy and expensive at each node, many IC vendors are exploring or pursuing alternative approaches using advanced packaging. The problem is there are too many advanced packaging options on the table already, and the list continues to grow. Moreover, each option has several tradeoffs and challenges, and all of them are still relatively expensive. ... » read more

Reducing Costly Flaws In Heterogeneous Designs
By Ed Sperling - 08 Oct, 2019 - Comments: 0

The cost of defects is rising as chipmakers begin adding multiple chips into a package, or multiple processor cores and memories on the same die. Put simply, one bad wire can spoil an entire system. Two main issues need to be solved to reduce the number of defects. The first is identifying the actual defect, which becomes more difficult as chips grow larger and more complex, and whenever chi... » read more

Testing Against Changing Standards In Automotive
By Ed Sperling and Kevin Fogarty - 08 Oct, 2019 - Comments: 0

The infusion of more semiconductor content into cars is raising the bar on reliability and changing the way chips are designed, verified and tested, but it also is raising a lot of questions about whether companies are on the right track at any point in time. Concerns about liability are rampant with autonomous and assisted driving, so standards are being rolled out well in advance of the te... » read more

The Race To Next-Gen 2.5D/3D Packages
By Mark LaPedus - 23 Sep, 2019 - Comments: 4

Several companies are racing each other to develop a new class of 2.5D and 3D packages based on various next-generation interconnect technologies. Intel, TSMC and others are exploring or developing future packages based on one emerging interconnect scheme, called copper-to-copper hybrid bonding. This technology provides a way to stack advanced dies using copper connections at the chip level,... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy