The Week In Review: Manufacturing

By Mark LaPedus - 13 Mar, 2015 - Comments: 0

Look out below! Intel has lowered its first-quarter revenue outlook. The company now expects first-quarter revenue to be $12.8 billion, plus or minus $300 million, compared to the previous expectation of $13.7 billion, plus or minus $500 million. “Intel may be experiencing greater-than-expected seasonal declines in both notebooks and desktops,” said Doug Freedman, an analyst with RBC Capita... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 27 Jun, 2014 - Comments: 0

As semiconductor technology becomes more challenging, expect more mergers and acquisitions in the fab tool sector. In a research report issued this week, Weston Twigg, an analyst with Pacific Crest Securities, sees several possible M&A scenarios in the future. There is no evidence that any deal is pending right now. But according to Twigg, here are some possible M&As that could happen i... » read more

Gaps In Metrology Could Impact Yield

By Mark LaPedus - 17 Apr, 2014 - Comments: 0

For some time, chipmakers have been developing new and complex chip architectures, such as 3D NAND, finFETs and stacked die. But manufacturing these types of chips is no simple task. It requires a robust fab flow to enable new IC designs with good yields. In fact, yield is becoming a more critical part of the flow. Yield is a broad term that means different things to different parts of the ... » read more

Inside A 450mm Metrology Consortium

By Mark LaPedus - 20 Jun, 2013 - Comments: 0

By Mark LaPedus Semiconductor Manufacturing & Design sat down to discuss 450mm metrology challenges with Menachem Shoval, a former manufacturing executive at Intel and chairman of the Metro450 consortium. The Israeli-based consortium is developing metrology technology for the next-generation, 450mm wafer size. The group consists of Intel, Applied Materials, Jordan Valley, Nanomotion, Nov... » read more

The Bumpy Road To 450mm

By Mark LaPedus - 16 May, 2013 - Comments: 0

By Mark LaPedus After its formation nearly 20 months ago, a 450mm consortium has reached its latest milestone by recently completing a cleanroom and installing the first 450mm demonstration tools in the facility. The so-called Global 450 Consortium (G450C) also has set a goal to bring 450mm fabs into high-volume manufacturing at the 10nm or 7nm nodes by 2018. That gives the industry a littl... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.

by Ed Sperling

tag: Nova

The Week In Review: Manufacturing

The Week In Review: Manufacturing

Gaps In Metrology Could Impact Yield

Inside A 450mm Metrology Consortium

The Bumpy Road To 450mm