Advanced Packaging Requires Better Yield


Whether Moore's Laws truly ends, or whether the semiconductor industry reaches into the Angstrom world after 3nm—the semiconductor industry dislikes fractions—advanced packaging increasingly will dominate semiconductor designs. Apple already is on board with its iPhone 7, using TSMC's fan-out approach. And all of the major foundries and OSATs are lining up with a long list of capabilitie... » read more

Packaging Wars Begin


The advanced IC-packaging market is turning into a high-stakes competitive battleground, as vendors ramp up the next wave of [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D"] technologies, high-density fan-out packages and others. At one time, the outsourced semiconductor assembly and test ([getkc id="83" comment="OSAT"]) vendors dominated and handled the chip-packaging requirement... » read more

Grappling With Manufacturing Data


As complexity goes up with each new process node, so does the amount of data that is generated, from initial GDSII to photomasks, manufacturing, yield and post-silicon validation. But what happens to that data, and what gets shared, remain a point of contention among companies across the semiconductor ecosystem. The problem is that to speed up the entire design through manufacturing process,... » read more

China’s Capital Equipment Market To Boom


The worldwide semiconductor capital equipment market declined 3% last year to $36.53 billion from 2014’s $37.5 billion, but inside China the story was significantly different. Capital equipment sales there increased by 12% in 2015, to $4.9 billion. In fact, only Japan showed a higher growth rate last year, of 31%, according to figures from [getentity id="22821" comment="SEMI"] and the Semi... » read more

Stacked Die Changes


Semiconductor Engineering sat down to discuss advanced packaging with David Pan, associate professor in the department of electrical and computer engineering at the University of Texas; Max Min, senior technical manager at Samsung; John Hunt, senior director of engineering at ASE; and Sitaram Arkalgud, vice president of 3D portfolio and technologies at Invensas. What follows are excerpts of tha... » read more

Building Faster Chips


By Ed Sperling and Jeff Dorsch An explosion in IoT sensor data, the onset of deep learning and AI, and the commercial rollout of augmented and virtual reality are driving a renewed interest in performance as the key metric for semiconductor design. Throughout the past decade in which mobility/smartphone dominated chip design, power replaced performance as the top driver. Processors ha... » read more

One-On-One: Dave Hemker


Dave Hemker, CTO at [getentity id="22820" comment="Lam Research"], sat down with Semiconductor Engineering to look at some of the key issues on the process and manufacturing side, and some of the key developments that will reshape the semiconductor industry in the future. What follows are excerpts of that conversation. SE: One of the big discussion topics these days is [getkc id="208" commen... » read more

2.5D Becomes A Reality


Semiconductor Engineering sat down to discuss 2.5D and advanced packaging with Max Min, senior technical manager at [getentity id="22865" e_name="Samsung"]; Rob Aitken, an [getentity id="22186" comment="ARM"] fellow; John Shin, vice president at [getentity id="22903" e_name="Marvell"]; Bill Isaacson, director of ASIC marketing at [getentity id="22242" e_name="eSilicon"]; Frank Ferro, senior di... » read more

Foundries Expand Their Scope


By Ed Sperling & Mark LaPedus Major foundries are stepping up their offerings across a wide swath of technology nodes, specialty processes and advanced packaging—a recognition that end markets are fragmenting and that the path forward includes a mix of new and established processes. As the smart phone market flattens, there is no single "next big thing" to drive volume at the most ... » read more

How Many Cores? (Part 2)


New chip architectures and new packaging options—including fan-outs and 2.5D—are changing basic design considerations for how many cores are needed, what they are used for, and how to solve some increasingly troublesome bottlenecks. As reported in part one, just adding more cores doesn't necessarily improve performance, and adding the wrong size or kinds of cores wastes power. That has s... » read more

← Older posts Newer posts →