Outlook For Masks, Materials and Wafers

By Mark LaPedus - 15 Aug, 2019 - Comments: 0

After a slowdown in the first half of 2019, chipmakers and equipment vendors face a cloudy outlook for the second half of this year, with a possible recovery in 2020. But what about other key technologies like materials, photomasks and silicon wafers? These are also critical for the semiconductor supply chain and are key indicators where the market is heading. In the first half of 2019, m... » read more

Renaissance In The Photomask Market?

By Lara Chamness - 08 May, 2019 - Comments: 0

The semiconductor industry has been on a roll for the past few years – and the rising tide has lifted segments spanning the supply chain. The photomask market, in particular, has seen exceptionally strong growth of 13 percent and 8 percent in 2017 and 2018, respectively. The upsurge is striking given that, in the early to mid-2000s, the photomask market averaged less than 4 percent annual gro... » read more

Week In Review: Manufacturing, Test

By Mark LaPedus - 29 Mar, 2019 - Comments: 0

Materials Wesfarmers, an Australian diversified firm, has made an unsolicited bid to acquire Lynas, one of the world’s largest suppliers of rare earths outside of China. Rare earths are chemical elements found in the Earth’s crust. They are used in cars, consumer electronics, computers, communications, clean energy and defense systems. The big market for rare earths is magnets. In semicond... » read more

EUV Mask Readiness Challenges

By Mark LaPedus - 21 Mar, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss extreme ultraviolet (EUV) lithography and photomask technologies with Emily Gallagher, principal member of the technical staff at Imec; Harry Levinson, principal at HJL Lithography; Chris Spence, vice president of advanced technology development at ASML; Banqiu Wu, senior director of process development at Applied Materials; and Aki Fujimura, chief ... » read more

Lithography Challenges For Fan-out

By Mark LaPedus - 12 Feb, 2019 - Comments: 3

Higher density fan-out packages are moving toward more complex structures with finer routing layers, all of which requires more capable lithography equipment and other tools. The latest high-density fan-out packages are migrating toward the 1µm line/space barrier and beyond, which is considered a milestone in the industry. At these critical dimensions (CDs), fan-outs will provide better per... » read more

EUV Mask Blank Battle Brewing

By Mark LaPedus - 15 Nov, 2018 - Comments: 2

Amid the ramp of extreme ultraviolet (EUV) lithography in the market, suppliers of EUV mask blanks are expanding their production. And a new player—Applied Materials—is looking to enter the market. AGC and Hoya, the two main suppliers of EUV mask blanks, are adding capacity for these critical components that are used for EUV photomasks. A mask blank serves as the substrate for a photomas... » read more

Blog Review: Oct. 24

By Jesse Allen - 24 Oct, 2018 - Comments: 0

Arm's Shidhartha Das digs into Power Delivery Networks with a look at how the specific roles of different components work to provide smooth supply conditions. In a video, VLSI Research's Dan Hutcheson chats with D2S CEO Aki Fujimura about the state of the photomask market, EUV optimism, and the most interesting findings from this year's eBeam Initiative survey. Synopsys' Prasad Subudhi K.... » read more

Fabs Meet Machine Learning

By Mark LaPedus - 19 Jul, 2018 - Comments: 2

Aki Fujimura, chief executive of D2S, sat down with Semiconductor Engineering to discuss Moore’s Law and photomask technology. Fujimura also explained how artificial intelligence and machine learning are impacting the IC industry. What follows are excerpts of that conversation. SE: For some time, you’ve said we need more compute power. So we need faster chips at advanced nodes, but cost... » read more

Chipmakers Look Beyond Scaling

By Ed Sperling - 17 May, 2018 - Comments: 1

Gary Patton, CTO of GlobalFoundries, sat down with Semiconductor Engineering to discuss the rollout of EUV, the rising cost of designing chips at the most advanced nodes, and the growing popularity of 22nm planar FD-SOI in a number of markets. What follows are excerpts of that conversation. SE: You've just begun deploying EUV. Are you experiencing any issues? Patton: It's a very complicat... » read more

Searching For EUV Mask Defects

By Mark LaPedus - 19 Oct, 2017 - Comments: 2

Chipmakers hope to insert extreme ultraviolet (EUV) lithography at 7nm and/or 5nm, but several challenges need to be solved before this technology can be used in production. One lingering issue that is becoming more worrisome is how to find [gettech id="31045" comment="EUV"] mask defects. That isn't the only issue, of course. The industry continues to work on the power source and resists. Bu... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: photomasks