Sorting Out Next-Gen Memory

By Mark LaPedus - 22 Sep, 2016 - Comments: 8

In the data center and related environments, high-end systems are struggling to keep pace with the growing demands in data processing. There are several bottlenecks in these systems, but one segment that continues to receive an inordinate amount of attention, if not part of the blame, is the memory and storage hierarchy. [getkc id="92" kc_name="SRAM"], the first tier of this hierarchy, is... » read more

The Future Of Memory

By Ed Sperling - 16 Jun, 2016 - Comments: 2

Semiconductor Engineering sat down to discuss future memory with Frank Ferro, senior director of product management for memory and interface IP at [getentity id="22671" e_name="Rambus"]; Marc Greenberg, director of product marketing at [getentity id="22035" e_name="Synopsys"]; and Lisa Minwell, [getentity id="22242" e_name="eSilicon"]'s senior director of [getkc id="43" kc_name="IP"] marketing.... » read more

What’s Next For NAND?

By Mark LaPedus - 19 May, 2016 - Comments: 2

NAND flash memory is a key enabler in today’s systems, but it’s a difficult business. NAND suppliers require deep pockets and strong technology to survive in the competitive landscape. And going forward, vendors face new challenges on several fronts. On one front, for example, the overall NAND market is currently in the doldrums, amid soft product prices and a mild capacity glut. Demand ... » read more

Why This Roadmap Matters

By Ed Sperling - 05 May, 2016 - Comments: 0

The semiconductor industry is now officially looking beyond PCs and servers, establishing metrics and guidance for existing and developing market segments rather than just focusing on how to get to the next process nodes. The IEEE's International Roadmap for Devices and Systems marks a fundamental shift in the industry. The uncertainty that has ensued ever since the introduction of 3D transi... » read more

Inside Process Technology

By Mark LaPedus - 21 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss the foundry business, memory, process technology, lithography and other topics with David Fried, chief technology officer at [getentity id="22210" e_name="Coventor"], a supplier of predictive modeling tools. What follows are excerpts of that conversation. SE: Chipmakers are ramping up 16nm/14nm finFETs today, with 10nm and 7nm finFETs just around... » read more

Rightsizing Challenges Grow

By Ed Sperling - 20 Apr, 2016 - Comments: 0

Rightsizing chip architectures is getting much more complicated. There are more options to choose from, more potential bottlenecks, and many more choices about what process to use at what process node and for which markets and price points. Rightsizing is a way of targeting chips to specific application needs, supplying sufficient performance while minimizing power and cost. It has been a to... » read more

It’s All About DRAM

By Ed Sperling - 14 Apr, 2016 - Comments: 4

For decades, the starting point for compute architectures was the processor. In the future, it likely will be the DRAM architecture. Dynamic random access memory always has played a big role in computing. Since IBM's Robert Dennard invented DRAM back in 1966, it has become the gold standard for off-chip memory. It's fast, cheap, reliable, and at least until about 20nm, it has scaled quite n... » read more

New Memory Approaches And Issues

By Ed Sperling - 14 Mar, 2016 - Comments: 1

New memory types and approaches are being developed and tested as DRAM and Moore's Law both run out of steam, adding greatly to the confusion of what comes next and how that will affect chip designs. What fits where in the memory hierarchy is becoming less clear as the semiconductor industry grapples with these changes. New architectures, such as [getkc id="202" kc_name="fan-outs"] and [getk... » read more

What’s Next For DRAM?

By Mark LaPedus - 24 Feb, 2016 - Comments: 2

The DRAM business has always been challenging. Over the years, DRAM suppliers have experienced a number of boom and bust cycles in a competitive landscape. But now, the industry faces a cloudy, if not an uncertain, future. On one front, for example, [getkc id="93" kc_name="DRAM"] vendors face a downturn amid a capacity glut and falling product prices in 2016. But despite the business chal... » read more

Neuromorphic Chip Biz Heats Up

By Mark LaPedus - 21 Jan, 2016 - Comments: 0

It’s no secret that today’s computers are struggling to keep up with the enormous demands of data processing and bandwidth, and the whole electronics industry is searching for new ways to enable that. The traditional approach is to continue to push the limits of today’s systems and chips. Another way is to go down the non-traditional route, including an old idea that is generating stea... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.