中文 English

Cleaning Up During IC Test


Test is a dirty business. It can contaminate a unit or wafer, or the test hardware, which in turn can cause problems in the field. While this has not gone unnoticed, particularly as costs rise due to increasing pin and ball density, and as more chips are bundled together in a package, the cost of dirt continues to be a focus. Cleaning recipes for test interface boards are changing, and analy... » read more

Driving Toward Predictive Analytics With Dynamic Parametric Test


The foundation of parametric test within semiconductor manufacturing is its usefulness in determining that wafers have been fabricated properly. Foundries use parametric test results to help verify that wafers can be delivered to a customer. For IDMs, the test determines whether the wafers can be sent on for sorting. Usually inserted into the semiconductor manufacturing flow during wafer fabric... » read more

Digging Much Deeper With Unit Retest


Keeping test costs flat in the face of product complexity continues to challenge both product and test engineers. Increased data collection at package-level test and the ability to respond to it in a never-before level of detail has prompted device makers and assembly and test houses to tighten up their retest processes. Test metrology, socket contamination, and mechanical alignment have alw... » read more

Managing Wafer Retest


Every wafer test touch-down requires a balance between a good electrical contact and preventing damage to the wafer and probe card. Done wrong, it can ruin a wafer and the customized probe card and result in poor yield, as well as failures in the field. Achieving this balance requires good wafer probing process procedures as well as monitoring of the resulting process parameters, much of it ... » read more