BEOL Issues At 10nm And 7nm (part 2)

By Ed Sperling - 04 Jan, 2017 - Comments: 3

Semiconductor Engineering sat down to discuss problems with the back end of line at leading-edge nodes with Craig Child, senior manager and deputy director for [getentity id="22819" e_name="GlobalFoundries'"] advanced technology development integration unit; Paul Besser, senior technology director at [getentity id="22820" comment="Lam Research"]; David Fried, CTO at [getentity id="22210" e_name... » read more

Architect Specs Harder To Follow

By Ann Mutschler - 28 Dec, 2016 - Comments: 0

Interpreting and implementing architects' specifications is getting harder at each new process node, which is creating problems throughout the design flow, into manufacturing, and sometimes even post-production. Rising complexity and difficulties in scaling have pushed much more of the burden onto architects to deal with everything from complex power schemes, new packaging approaches, and to... » read more

Timing Closure Issues Resurface

By Ed Sperling - 07 Dec, 2016 - Comments: 1

Timing closure has resurfaced as a major challenge at 10nm and 7nm due to more features and power modes, increased process variation and other manufacturing-related issues. While timing-related problems are roughly correlated to rising complexity in semiconductors, they tend to generate problems in waves—about once per decade. In SoCs, timing closure problems have spawned entire methodolog... » read more

Fill/Cut Self-Aligned Double-Patterning

By David Abercrombie - 17 Nov, 2016 - Comments: 0

By David Abercrombie, Rehab Ali, Ahmed Hamed-Fatehy, and Shetha Nolke Self-aligned double patterning (SADP) is an alternative double-patterning process to the traditional litho-etch-litho-etch (LELE) approach used in most advanced production nodes. The main difference between the two approaches is that in LELE, the layout is divided between two masks, and the second mask is aligned with resp... » read more

Why EUV Is So Difficult

By Mark LaPedus - 17 Nov, 2016 - Comments: 23

For years, extreme ultraviolet (EUV) lithography has been a promising technology that was supposed to help enable advanced chip scaling. But after years of R&D, EUV is still not in production despite major backing from the industry, vast resources and billions of dollars in funding. More recently, though, [gettech id="31045" comment="EUV"] lithography appears to be inching closer to pos... » read more

Deeper Inside Intel

By Mark LaPedus - 22 Aug, 2016 - Comments: 5

Mark Bohr, senior fellow and director of process architecture and integration at Intel, and Zane Ball, vice president in the Technology and Manufacturing Group at Intel and co-general manager of Intel Custom Foundry, sat down with Semiconductor Engineering to discuss the future directions of transistors, process technology, the foundry business and packaging. What follows are excerpts of those ... » read more

Atomic Layer Etch Heats Up

By Mark LaPedus - 29 Jun, 2016 - Comments: 0

The atomic layer etch (ALE) market is starting to heat up as chipmakers push to 10nm and beyond. ALE is a promising next-generation etch technology that has been in R&D for the last several years, but until now there has been little or no need to use it. Unlike conventional etch tools, which remove materials on a continuous basis, ALE promises to selectively and precisely remove targete... » read more

What Happened To DSA?

By Mark LaPedus - 19 May, 2016 - Comments: 2

Directed self-assembly (DSA) was until recently a rising star in the next-generation lithography (NGL) landscape, but the technology has recently lost some of its luster, if not its momentum. So what happened? Nearly five years ago, an obscure patterning technology called [gettech id="31046" t_name="DSA"] burst onto the scene and began to generate momentum in the industry. At about that t... » read more

Inside Process Technology

By Mark LaPedus - 21 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss the foundry business, memory, process technology, lithography and other topics with David Fried, chief technology officer at [getentity id="22210" e_name="Coventor"], a supplier of predictive modeling tools. What follows are excerpts of that conversation. SE: Chipmakers are ramping up 16nm/14nm finFETs today, with 10nm and 7nm finFETs just around... » read more

Where Is Next-Gen Lithography?

By Mark LaPedus - 31 Mar, 2016 - Comments: 2

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Greg McIntyre, director of the Advanced Patterning Department at [getentity id="22217" comment="Imec"]; Harry Levinson, senior fellow and senior director of technology research at [getentity id="22819" comment="GlobalFoundries"]; Uday Mitra, vice president and head of strategy and marketing for the Etch Bu... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?