tag: stacked die

Changes And Challenges
By Ed Sperling - 18 Jul, 2013 - Comments: 0

At 130nm, the shift to copper interconnects and 300mm wafer sizes was considered to be the most difficult transition in its long and incredibly efficient history. The next chapter will be even tougher. It’s not that change is a foreign concept to semiconductor design and manufacturing. In fact, it’s probably the only constant over the past 50 years. But in the past, those changes tended ... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 15 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: Does the increasing collaboration in the ecos... » read more

Experts At The Table: Who Pays For Low Power?
By Ed Sperling - 11 Jul, 2013 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down to discuss the cost of low power with Fadi Gebara, research staff member for IBM’s Austin Research Lab; David Pan, associate professor in the department of electrical and computer engineering at the University of Texas; Aveek Sarkar, vice president of product engineering and support at Apache Design; and Tim Whitfield, director o... » read more

Dealing With New Bottlenecks
By Ed Sperling - 11 Jul, 2013 - Comments: 0

By Ed Sperling While the number of options for improving efficiency and performance in designs continues to increase, the number of challenges in getting chips at advanced process nodes out the door is increasing, too. Thinner wires, routing congestion, more power domains, IP integration and lithography issues are conspiring to make design much more difficult than in the past. So why aren�... » read more

New Approaches To Better Performance And Lower Power
By Ed Sperling - 11 Jul, 2013 - Comments: 0

By Ed Sperling Until 90nm, every feature shrink and rev of Moore’s Law included a side benefit of better power and performance. After that, improvements involved everything from different back-end processes to copper interconnects and transistor structures. But from 20nm onward, the future will rest with a combination of new materials, new architectures and new packaging approaches—and som... » read more

The Rise Of Semiconductor IP Subsystems
By Various Writers - 11 Jul, 2013 - Comments: 0

The semiconductor IP (SIP) market arose when SIP vendors created IP functions that mirrored those found in the discrete semiconductor market and made those functions available to SoC designers in the form of hard or soft SIP blocks. As the SoC and SIP markets evolved, it was a natural evolution that many discrete SIP functions be converged into larger blocks that mimic system-level functions (i... » read more

Foundry Talk
By Ed Sperling - 07 Jul, 2013 - Comments: 0

GlobalFoundries CEO Ajit Manocha sounds off on Foundry 2.0, 450mm wafers, lithography challenges, stacked die, the Internet of Things and the rush to the next process node. [youtube vid=WfjtlZkCi0w] » read more

Faster IP Integration
By Ed Sperling - 03 Jul, 2013 - Comments: 0

By Ed Sperling System-Level Design sat down with Laurent Moll, chief technology officer at Arteris, to talk about interoperability, complexity and integration issues. What follows are excerpts of that conversation. SLD: What’s the big challenge with IP? Moll: Interoperability is always a concern. Because of ARM’s dominance, a lot of people are moving to AMBA protocols, whether that’... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 01 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: How are chipmakers working with the rest ... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 01 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: How are chipmakers working with the rest... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy