Litho Options For Panel Fan-out


Several packaging houses are inching closer to production of panel-level fan-out packaging, a next-generation technology that promises to reduce the cost of today’s fan-out packages. In fact, ASE, Nepes, Samsung and others already have installed the equipment in their panel-level fan-out lines with production slated for 2018 or so. But behind the scenes, panel-level packaging houses contin... » read more

The Week In Review: Manufacturing


Chipmakers Bloomberg has reported that Broadcom is in talks to acquire Qualcomm for $70 per share or about $90 billion. Qualcomm is attempting to acquire NXP, but Broadcom has its sights on Qualcomm, not NXP. “We think AVGO would want to acquire QCOM assets not NXP,” said Amit Daryanani, an analyst with RBC. Samsung continues to reshuffle its management amid a plethora of changes at t... » read more

The Week In Review: Manufacturing


Market research The IC market remains hot, as several market researchers are raising their forecasts--again. Gartner recently raised its overall IC forecast. Now, IC Insights has raised its IC market growth rate forecast for 2017 to 22%, up six percentage points from the 16% increase shown in its mid-year update. In March, IC Insights raised its worldwide IC market growth forecast for 2017 ... » read more

Next-Gen Mask Writer Race Begins


Competition is heating up in the mask writer equipment business as two vendors—Intel/IMS and NuFlare—vie for position in the new and emerging multi-beam tool segment. Last year, Intel surprised the industry by acquiring IMS Nanofabrication, a multi-beam e-beam mask writer equipment vendor. Also last year, IMS, now part of Intel, began shipping the world’s first multi-beam mask writer f... » read more

Looming Issues And Tradeoffs For EUV


Momentum is building for extreme ultraviolet (EUV) lithography, but there are still some major challenges to solve before this long-overdue technology can be used for mass production. [gettech id="31045" comment="EUV"] lithography—a next-generation technology that patterns tiny features on a chip—was supposed to move into production around 2012. But over the years, EUV has encountered se... » read more

The Week In Review: Manufacturing


Chipmakers GlobalFoundries has asked European antitrust regulators to investigate TSMC over alleged unfair competition, according to a report from Reuters. Commenting on the report, a spokeswoman for GlobalFoundries said: “We are not surprised that the European Commission is looking into anti-competitive market practices and abusive conduct in the semiconductor sector. The semiconductor indu... » read more

Unsolved Litho Issues At 7nm


By Ed Sperling & Mark LaPedus EUV lithography is creating a new set of challenges on the photomask side for which there currently are no simple solutions. While lithography is viewed as a single technology, [gettech id="31045" comment="EUV"] actually is a collection of technologies. Not all of those technologies have advanced equally and simultaneously, however. For example, aberrations... » read more

The Week In Review: Manufacturing


Chipmakers Toshiba has changed its mind yet again about which group will buy its prized memory unit. On June 20, Toshiba chose a Japanese government-led consortium of INCJ/DBJ, Bain Capital and South Korea’s SK Hynix. Then, Toshiba changed its mind and selected a similar group with Western Digital (WDC), leaving SK Hynix on the outside looking in. This week, Toshiba signed a deal with a B... » read more

Four Foundries Back MRAM


Four major foundries plan to offer MRAM as an embedded memory solution by this year or next, setting the stage for what finally could prove to be a game-changer for this next-generation memory technology. GlobalFoundries, Samsung, TSMC and UMC plan to start offering spin-transfer torque magnetoresistive RAM (ST-MRAM or STT-MRAM) as an alternative or a replacement to NOR flash, possibly start... » read more

The 200mm Equipment Scramble


An explosion in 200mm demand has set off a frenzied search for used semiconductor manufacturing equipment that can be used at older process nodes. The problem is there is not enough used equipment available, and not all of the new or expanding 200mm fabs can afford to pay the premium for refurbished or new equipment. This may sound like a straightforward supply and demand issue, but behind t... » read more

← Older posts Newer posts →