Building a functional transistor integrated with ferroelectric RAM
Abstract:
“Ferroelectric field-effect transistors employ a ferroelectric material as a gate insulator, the polarization state of which can be detected using the channel conductance of the device. As a result, the devices are potentially of use in non-volatile memory technology, but they suffer from short retention times, which limits their wider application. Here, we report a ferroelectric semiconductor field-effect transistor in which a two-dimensional ferroelectric semiconductor, indium selenide (α-In2Se3), is used as the channel material in the device. α-In2Se3 was chosen due to its appropriate bandgap, room-temperature ferroelectricity, ability to maintain ferroelectricity down to a few atomic layers and its potential for large-area growth. A passivation method based on the atomic layer deposition of aluminium oxide (Al2O3) was developed to protect and enhance the performance of the transistors. With 15-nm-thick hafnium oxide (HfO2) as a scaled gate dielectric, the resulting devices offer high performance with a large memory window, a high on/off ratio of over 108, a maximum on current of 862 μA μm−1 and a low supply voltage.”
Find the technical paper here. Also, Purdue University’s news writeup (12/9/19) can be found here.
Leave a Reply