The Week In Review: Design/IoT
By Jesse Allen - 20 Feb, 2015 - Comments: 0

Deals Arteris teamed up with Yogitech to integrate the two companies' products. They're planning a set of ISO 26262 deliverables for a series of SoC reference designs and a functional safety assessment of the Arteris FlexNoC interconnect IP. ARM and Green Hills Software collaborated on an optimized compiler for the Cortex-R5 processor. The compiler achieved a score of 1.01EEMBC Automarks/... » read more

5 Disruptive Mask Technologies
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

Photomask complexity and costs are increasing at each node, thereby creating a number of challenges on several fronts. On one front, for example, traditional single-beam e-beam tools are struggling to keep up with mask complexity. As a result, the write times and costs continue to rise. Mask complexity also impacts the other parts of the tool flow, such as inspection, metrology and repair. I... » read more

How To Extend Litho Scaling
By Ann Mutschler - 19 Feb, 2015 - Comments: 0

IC mask [getkc id="80" comment="lithography"] today is sophisticated and complex. It's also a work in progress with a lot of unknowns as the industry struggles to increase productivity while reducing risk. The bulk of the work currently is focused on trying to figure out what would be a practical scheme for patterning lithography that could be used at 10nm and 7nm, said Gandharv Bhatara, Ca... » read more

3D NAND Market Heats Up
By Mark LaPedus - 19 Feb, 2015 - Comments: 4

After some delays and uncertainty in past years, the 3D NAND market is finally heating up. In 2013 and 2014, Samsung was the only vendor participating in the 3D NAND market. Most other suppliers were supposed to ship 3D NAND devices in volumes last year, but vendors pushed out their production dates for various business and technical reasons. Going into 2015, [getentity id="22865" e_nam... » read more

Demonstrating The Benefits Of Source-Mask Optimization And Enabling Technologies Through Experiment And Simulations
By Mentor, a Siemens Business - 19 Feb, 2015 - Comments: 0

In recent years the potential of Source-Mask Optimization (SMO) as an enabling technology for 22nm-and-beyond lithography has been explored and documented in the literature. It has been shown that intensive optimization of the fundamental degrees of freedom in the optical system allows for the creation of non-intuitive solutions in both the mask and the source, which leads to improved lithograp... » read more

Will 10nm Be The Last Big Node?
By Ed Sperling - 19 Feb, 2015 - Comments: 0

There is a great deal of attention being paid to established nodes these days and everything up to and including 10nm. What comes after that remains a mystery. Intel and a handful of others will keep pushing to the next nodes, of course. Still, where the commercial foundries—including Intel—place their next big bets is a matter of ongoing debate. There is no doubt that 7nm and 5nm will b... » read more

The Power Of Collaboration: Solutions For Improving Manufacturing
By Tony Massimini - 19 Feb, 2015 - Comments: 0

The Fab Owners Association (FOA) held its third annual Collaborative Forum in Santa Clara, Calif., earlier this month. The focus of this event was to discuss how companies are able to work together to improve manufacturing efficiencies in wafer fabs. The forum is by invite only to FOA members, and I was invited to make a presentation on the market trends due to the impact of MEMS and Sensors. ... » read more

One-On-One: Dave Hemker
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Dave Hemker, senior vice president and chief technology officer at [getentity id="22820" comment="LAM Research"]. SE: On the technology front, the IC industry is undergoing some new and dramatic changes. What are some of those changes? Hemker: We focus on what we call the inflections.... » read more

Talking About Dark Silicon
By Katherine Derbyshire - 19 Feb, 2015 - Comments: 0

Back in January, my article on dark silicon referenced work done by Michael Taylor and his research group at UC San Diego. I wasn’t able to arrange an interview with Dr. Taylor in time for that article, but we did have an extended conversation earlier this week. He pointed out that, while further decreases in threshold voltage are constrained by device leakage, the energy consumed by a circui... » read more

Searching For Rare Earths Again
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

Rare earths are back in the spotlight again. Rare earths are chemical elements found in the Earth’s crust. They are used in cars, consumer electronics, computers, communications, clean energy and defense systems. The big market for rare earths is magnets. In semiconductor production, rare earths are used in high-k dielectrics, CMP slurries and other applications. Last year, the World Tr... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy