category: Top Stories

category: IoT, Security & Automotive

Next Steps For Panel-Level Packaging
By Mark LaPedus - 20 Dec, 2021 - Comments: 1

Tanja Braun, group manager at Fraunhofer Institute for Reliability and Microintegration (IZM), sat down with Semiconductor Engineering to talk about III-V device packaging, chiplets, fan-out and panel-level processing. Fraunhofer IZM recently announced a new phase of its panel-level packaging consortium. What follows are excerpts of that discussion. SE: IC packaging isn’t new, but years a... » read more

GaN Application Base Widens, Adoption Grows
By Patrick Waurzyniak - 16 Dec, 2021 - Comments: 0

Gallium nitride (GaN) is beginning to show up across a broad range of power semiconductor applications due to its wide bandgap, enabling fast-charging, very high speeds, and much smaller form factors than silicon-based chips. Unlike silicon carbide (SiC), another wide-bandgap technology, GaN is a lateral rather than a vertical device. GaN tops out at about 900 volts, which limits its use in ... » read more

Batteries Have Moving Parts
By Katherine Derbyshire - 16 Dec, 2021 - Comments: 0

The race is on to make lithium-ion batteries safer, to increase the amount of energy that can be drawn out of these devices, and to reduce the time it takes to charge them up again. Transistors and other electronic components depend on the movement of electrons, which are effectively massless and dimensionless relative to the semiconductor, metal, and dopant atoms that surround them. A batte... » read more

Business, Technology Challenges Increase For Photomasks
By Mark LaPedus - 16 Dec, 2021 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss optical and EUV photomasks issues, as well as the challenges facing the mask business, with Naoya Hayashi, research fellow at DNP; Peter Buck, director of MPC & mask defect management at Siemens Digital Industries Software; Bryan Kasprowicz, senior director of technical strategy at Hoya; and Aki Fujimura, CEO of D2S. What f... » read more

China Accelerates Foundry, Power Semi Efforts
By Mark LaPedus - 22 Nov, 2021 - Comments: 4

China has unveiled several initiatives to advance its domestic semiconductor industry, including a new and massive fab expansion campaign in the foundry, gallium-nitride (GaN), and silicon carbide (SiC) markets. The nation is making a big push into what it calls “third-generation semiconductors,” which is a misnomer. The term actually refers to two existing and common power semiconductor... » read more

End In Sight For Chip Shortages?
By Mark LaPedus - 18 Nov, 2021 - Comments: 2

The current wave of semiconductor and IC packaging shortages is expected to extend well into 2022, but there are also signs that supply may finally catch up with demand. The same is true for manufacturing capacity, materials and equipment in both the semiconductor and packaging sectors. Nonetheless, after a period of shortages in all segments, the current school of thought is that chip suppl... » read more

The Race To Make Better Qubits
By Katherine Derbyshire - 18 Nov, 2021 - Comments: 0

One of the big challenges in quantum computing is getting qubits to last long enough to do something useful with them. After decades of research, there now appears to be tangible progress. The challenge with any new semiconductor technology is to improve performance by one or more orders of magnitude without discarding a half-century of progress in other areas. Qubits based on silicon quantu... » read more

A Broad Look Inside Advanced Packaging
By Mark LaPedus - 18 Nov, 2021 - Comments: 0

Choon Lee, chief technology officer of JCET, sat down with Semiconductor Engineering to talk about the semiconductor market, Moore’s Law, chiplets, fan-out packaging, and manufacturing issues. What follows are excerpts of that discussion. SE: Where are we in the semiconductor cycle right now? Lee: If you look at 2020, it was around 10% growth in the overall semiconductor industry. ... » read more

3D Printing For More Circuits
By Ann R. Thryft - 27 Oct, 2021 - Comments: 0

After several years of experimentation, and growing success in volume manufacturing for some use cases, technologies for 3D printing of electronic circuits are becoming more common. Some innovations in processes and materials are moving these technologies closer to mainstream electronics manufacturing. Christopher Tuck, professor of material science at the University of Nottingham, observed ... » read more

Scaling Bump Pitches In Advanced Packaging
By Mark LaPedus - 25 Oct, 2021 - Comments: 0

Interconnects for advanced packaging are at a crossroads as an assortment of new package types are pushing further into the mainstream, with some vendors opting to extend the traditional bump approaches while others roll out new ones to replace them. The goal in all cases is to ensure signal integrity between components in IC packages as the volume of data being processed increases. But as d... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy