Sidestepping Moore’s Law

By Mark LaPedus - 20 Jun, 2019 - Comments: 2

Calvin Cheung, vice president of engineering at ASE, sat down with Semiconductor Engineering to talk about advanced packaging, the challenges involved with the technology, and the implications for Moore’s Law. What follows are excerpts of that conversation. SE: What are some of the big issues with IC packaging today? Cheung: Moore’s Law is slowing down, but transistor scaling will co... » read more

Wrestling With High-Speed SerDes

By Ann Mutschler - 19 Jun, 2019 - Comments: 2

SerDes has emerged as the primary solution in chips where there is a need for fast data movement and limited I/O, but this technology is becoming significantly more challenging to work with as speeds continue to rise to offset the massive increase in data. A Serializer/Deserializer is used to convert parallel data into serial data, allowing designers to speed up data communication without h... » read more

Power, Reliability And Security In Packaging

By Ed Sperling - 19 Jun, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with Ajay Lalwani, vice president of global manufacturing operations at eSilicon; Vic Kulkarni, vice president and chief strategist in the office of the CTO at ANSYS; Calvin Cheung, vice president of engineering at ASE; Walter Ng, vice president of business management at UMC; and Tien Shiah, senior manager for memory at Samsun... » read more

Manufacturing Bits: June 18

By Mark LaPedus - 18 Jun, 2019 - Comments: 0

Making microvias in packages At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, Georgia Institute of Technology, Tokyo Ohka Kogyo (TOK) and Panasonic presented a paper on a technology that enables ultra-small microvias for advanced IC packages. Researchers demonstrated a picosecond UV laser technology as well as materials, which enabled 2μm to 7μm vias... » read more

ECTC Packaging Trends

By Mark LaPedus - 10 Jun, 2019 - Comments: 0

At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, a number of packaging houses, R&D organizations and universities presented a slew of papers on the latest IC packaging technologies. The event provided a glimpse of the future of packaging, which is becoming more important in the industry. At one time, IC packaging took a backseat in the semiconductor... » read more

CEO Outlook: It Gets Much Harder From Here

By Ed Sperling - 03 Jun, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss what's changing across the semiconductor industry with Wally Rhines, CEO emeritus at Mentor, a Siemens Business; Jack Harding, president and CEO of eSilicon; John Kibarian, president and CEO of PDF Solutions; and John Chong, vice president of product and business development for Kionix. What follows are excerpts of that discussion, which was held in... » read more

Partitioning In 3D

By Katherine Derbyshire - 23 May, 2019 - Comments: 2

The best way to improve transistor density isn't necessarily to cram more of them onto a single die. Moore’s Law in its original form stated that device density doubles about every two years while cost remains constant. It relied on the observation that the cost of a processed silicon wafer remained constant regardless of the number of devices printed on it, which in turn depended on litho... » read more

Chiplet Momentum Builds, Despite Tradeoffs

By Brian Bailey - 13 May, 2019 - Comments: 0

Chip design is a series of tradeoffs. Some are technical, others are related to cost, competitive features or legal restrictions. But with the nascent 'chiplet' market, many of the established balance points are significantly altered, depending on market segments and ecosystem readiness. Chiplets provide an alternative mechanism for integrating intellectual property (IP) blocks into a semico... » read more

Raising The Abstraction Level For Power

By Brian Bailey - 09 May, 2019 - Comments: 0

Power-aware design is still a relatively new concern for many semiconductor products, and since inception it has changed several times and in different ways. Initially people were concerned about peak power. Today, they care about peak, total energy, thermal and other effects. The industry has tried several abstractions ranging from system-level analysis, which promised to swamp implementati... » read more

Focus Shifting From 2.5D To Fan-Outs For Lower Cost

By Ed Sperling - 29 Apr, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with Calvin Cheung, vice president of engineering at ASE; Walter Ng, vice president of business management at UMC; Ajay Lalwani, vice president of global manufacturing operations at eSilicon; Vic Kulkarni, vice president and chief strategist in the office of the CTO at ANSYS; and Tien Shiah, senior manager for memory at Samsung. W... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.

by Ed Sperling

Defining The Chiplet Socket

The industry may have started with the wrong approach for enabling a third-party chiplet ecosystem, but who will step in and fix it?

by Brian Bailey

tag: 2.5D

Sidestepping Moore’s Law

Wrestling With High-Speed SerDes

Power, Reliability And Security In Packaging

Manufacturing Bits: June 18

ECTC Packaging Trends

CEO Outlook: It Gets Much Harder From Here

Partitioning In 3D

Chiplet Momentum Builds, Despite Tradeoffs

Raising The Abstraction Level For Power

Focus Shifting From 2.5D To Fan-Outs For Lower Cost

Trending Articles

NAND Flash Targets 1,000 Layers

Testing For Thermal Issues Becomes More Difficult

Auto Chip Aging Accelerates In Hot Climates

Is In-Memory Compute Still Alive?

Baby Steps Toward 3D DRAM

Knowledge Centers
Entities, people and technologies explored