tag: 2.5D

A Practical Approach To DFT For Large SoCs And AI Architectures, Part II
By Rahul Singhal - 08 Mar, 2022 - Comments: 0

By Rahul Singhal and Giri Podichetty Part I of this article discusses the design-for-test (DFT) challenges of AI designs and strategies to address them at the die level. This part focuses on the test requirements of AI chips that integrate multiple dies and memories on the same package. Why 2.5D/3D chiplet-based designs for AI SoCs? Many semiconductor companies are adopting chiplet-based d... » read more

Unintended Coupling Issues Grow
By Brian Bailey - 24 Feb, 2022 - Comments: 0

The number of indirect and often unexpected ways in which one design element may be affected by another is growing, making it more difficult to ensure a chip — or multiple chips in a package — will perform reliably. Long gone are the days when the only way that one part of a circuit could influence another was by an intended wire connecting them. As geometries get smaller, frequencies go... » read more

Technology Advances, Shortages Seen For Wire Bonders
By Mark LaPedus - 17 Feb, 2022 - Comments: 2

A surge in demand for IC packages is causing long lead times for wire bonders, which are used to assemble three-fourths of the world’s packages. The wire bonder market doubled last year, alongside advanced packaging’s rise. Wirebonding is an older technology that typically flies under the radar. Still, packaging houses have multitudes of these key tools that help assemble many — but no... » read more

3D-IC: Great Opportunities, Great Challenges
By John Lee - 17 Feb, 2022 - Comments: 0

The growing adoption of 2.5D and 3D integrated circuits (3D-ICs) marks a major inflection point in the world of semiconductor design. Electronic designers demand greater integration densities and faster data transfer rates to meet the growing performance requirements of AI/ML, 5G/6G networks and autonomous vehicles as these technologies have outpaced the capabilities of any single chip. 3D-IC t... » read more

Preparing For 3D-ICs
By Ed Sperling - 16 Feb, 2022 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss the changes in design tools and methodologies needed for 3D-ICs, with Sooyong Kim, director and product specialist for 3D-IC at Ansys; Kenneth Larsen, product marketing director at Synopsys; Tony Mastroianni, advanced packaging solutions director at Siemens EDA; and Vinay Patwardhan, product management group director at Cadence... » read more

More Manufacturing Issues, More Testing
By Ed Sperling - 08 Feb, 2022 - Comments: 0

Douglas Lefever, CEO of Advantest America, sat down with Semiconductor Engineering to talk about changes in test, the impact of advanced packaging, and business changes that are happening across the flow. What follows are excerpts of that discussion. SE: What are the big changes ahead in test? Lefever: It's less about inflection points and more like moving from algebra to calculus in the ... » read more

Next-Gen 3D Chip/Packaging Race Begins
By Mark LaPedus - 31 Jan, 2022 - Comments: 5

The first wave of chips is hitting the market using a technology called hybrid bonding, setting the stage for a new and competitive era of 3D-based chip products and advanced packages. AMD is the first vendor to unveil chips using copper hybrid bonding, an advanced die-stacking technology that enables next-generation 3D-like devices and packages. Hybrid bonding stacks and connects chips usin... » read more

A New Dimension Of Complexity For IC Design
By Ann Mutschler - 27 Jan, 2022 - Comments: 0

Full 3D designs involving logic-on-logic are still in the tire-kicking stage, but gaps in the tooling already are showing up. This is especially evident with static timing analysis (STA), which is used to validate a design’s timing performance by checking all possible paths for timing violations. STA issues began popping up particularly with the introduction of hybrid bonding, a bumpless p... » read more

Growth Spurred By Negatives
By Brian Bailey - 27 Jan, 2022 - Comments: 0

The success and health of the semiconductor industry is driven by the insatiable appetite for increasingly complex devices that impact every aspect of our lives. The number of design starts for the chips used in those devices drives the EDA industry. But at no point in history have there been as many market segments driving innovation as there are today. Moreover, there is no indication this... » read more

Future Challenges For Advanced Packaging
By Mark LaPedus - 20 Jan, 2022 - Comments: 1

Michael Kelly, vice president of advanced packaging development and integration at Amkor, sat down with Semiconductor Engineering to talk about advanced packaging and the challenges with the technology. What follows are excerpts of that discussion. SE: We’re in the midst of a huge semiconductor demand cycle. What’s driving that? Kelly: If you take a step back, our industry has always ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy