tag: 7nm

Pick A Number
By Ed Sperling - 24 Sep, 2015 - Comments: 0

For the past two years there was some mumbling that 16/14nm would be short-lived, and that 10nm would be the place that foundries would invest heavily. Now the buzz is that 10nm may be skipped entirely and the next node will be 7nm. After all, 10nm is really only a half-node. Or is it? The answer depends on who's defining 10nm. The 16/14nm node is based on a 20nm back-end-of-line process, un... » read more

Raise A Fence, Dig A Tunnel, Build A Bridge
By Ed Sperling - 17 Sep, 2015 - Comments: 0

There are three main options for chipmakers over the course of the next decade. Which option they choose depends upon their individual needs, talents, and how much and what kind of differentiation they believe will matter to them. The options roughly fall into three categories—fence, bridge or tunnel. The fence option Rather than changing anything, the entire ecosystem can stick to wha... » read more

Mask Supply Chain Preps For 10nm
By Dylan McGrath - 17 Sep, 2015 - Comments: 0

As the semiconductor industry gears up for the 10nm logic node—now likely to begin in the second half of 2017—the photomask supply chain is preparing to grapple with the associated challenges, including dramatic increases in photomask complexity, write times and data volumes. The 10nm node will require more photomasks per mask set, the ability to print smaller and more complex features, ... » read more

EUV: Cost Killer Or Savior?
By Katherine Derbyshire - 17 Sep, 2015 - Comments: 4

Moore’s Law, the economic foundation of the semiconductor industry, states that transistor density doubles in each technology generation, at constant cost. As IMEC’s Arindam Mallik explained, however, the transition to a new technology node is not a single event, but a process. Typically, when the new technology is first introduced, it brings a 20% to 25% wafer cost increase. Process opt... » read more

Interconnect Challenges Grow
By Mark LaPedus - 20 Aug, 2015 - Comments: 1

It’s becoming apparent that traditional chip scaling is slowing down. The 16nm/14nm logic node took longer than expected to unfold. And the 10nm node and beyond could suffer the same fate. So what’s the main cause? It’s hard to pinpoint the problem, although many blame the issues on lithography. But what could eventually hold up the scaling train, and undo Moore’s Law, is arguably t... » read more

What Works After 7nm?
By Mark LaPedus - 20 Aug, 2015 - Comments: 3

An Steegen, senior vice president of process technology at [getentity id="22217" e_name="Imec"], the Belgium-based R&D organization, sat down with Semiconductor Engineering to discuss the future of process technology and transistor trends all the way to 3nm. SE: Some say the semiconductor industry is maturing. Yet we have more device types and options than ever before, right? Steegen:... » read more

Inside The 5G Smartphone
By Mark LaPedus - 20 Aug, 2015 - Comments: 3

Amid a slowdown in the cell phone business, the market is heating up for perhaps the next big thing in wireless—5th generation mobile networks or 5G. In fact, major carriers, chipmakers and telecom equipment vendors are all rushing to get a piece of the action in 5G, which is the follow-on to the current wireless standard known as 4G or long-term evolution (LTE). Intel, Samsung and Qualcom... » read more

Moving Electrons Is Getting Harder
By Ed Sperling - 13 Aug, 2015 - Comments: 1

Numerous executives across the ecosystem—from EDA and equipment companies to foundries—recently have stated that Moore's Law has at least 10 more years of life. This is interesting math, considering the semiconductor industry is now working on 10nm, with chips expected to roll out next year. So given that Moore's Law is on a two-year cadence of doubling the number of transistors every 24... » read more

How Long Will FinFETs Last?
By Ann Mutschler - 13 Aug, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss how long FinFETs will last and where we will we go next with Vassilios Gerousis, Distinguished Engineer at [getentity id="22032" e_name="Cadence"]; Juan Rey, Sr. Director of Engineering for Calibre R&D at [getentity id="22017" e_name="Mentor Graphics"]; Kelvin Low, Senior Director Foundry Marketing at [getentity id="22865" e_name="Samsung"]; and Vic... » read more

Which Process, Material, IP?
By Ed Sperling - 30 Jul, 2015 - Comments: 1

For years chipmakers have been demanding more choices. They've finally gotten what they wished for—so many possibilities, in fact, that engineering teams of all types are having trouble wading through them. And to make matters worse, some choices now come with unexpected and often unwanted caveats. At the most advanced nodes it's a given that being able to shrink features and double patter... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy