tag: Applied Materials

Etching Technology Advances
By Jeff Dorsch - 15 Dec, 2016 - Comments: 0

Let’s get really, really small. That directive from leading semiconductor companies and their customers is forcing the whole semiconductor supply chain to come up with new ways to design and manufacture ever-shrinking dimensions for chips. The current push is to 10nm and 7nm, but R&D into 5nm and 3nm is already underway. To put this in perspective, there are roughly two silicon atom... » read more

Inside Advanced Patterning
By Mark LaPedus - 15 Dec, 2016 - Comments: 0

Prabu Raja, group vice president and general manager for the Patterning and Packaging Group at [getentity id="22817" e_name="Applied Materials"], sat down with Semiconductor Engineering to discuss the trends in patterning, selective processes and other topics. Raja is also a fellow at Applied Materials. What follows are excerpts of that conversion. SE: From your standpoint, what are the big... » read more

Fab Tool Biz Faces Challenges In 2017
By Mark LaPedus - 15 Dec, 2016 - Comments: 3

After experiencing a gradual recovery and positive growth in 2016, the semiconductor equipment industry sees a mixed picture as well as some uncertainty in 2017. In the near term, though, business is robust. Several chipmakers started to place a sizeable number of fab tool orders in the latter part of 2016, particularly in three areas—3D NAND, logic and foundry. Now, after buying the in... » read more

More Than Just Carbon Dioxide
By Katherine Derbyshire - 14 Dec, 2016 - Comments: 0

As discussed in Part Two of this series, lifecycle analyses of greenhouse gas emissions consider both direct and indirect sources. Indirect CO2 emissions, attributed to electricity and other forms of energy purchased by the fab, are the semiconductor industry’s single largest environmental impact. Of those emissions, a large fraction are attributable to plasma-based etch and deposition steps,... » read more

Can We Measure Next-Gen FinFETs?
By Mark LaPedus - 21 Nov, 2016 - Comments: 6

After ramping up their respective 16nm/14nm finFET processes, chipmakers are moving towards 10nm and/or 7nm, with 5nm in R&D. But as they move down the process roadmap, they will face a new set of fab challenges. In addition to lithography and interconnects, there is metrology. Metrology, the science of measurements, is used to characterize tiny films and structures. It helps to boost yi... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 18 Nov, 2016 - Comments: 0

Chipmakers Next month, GlobalFoundries will host a job fair in Portland, Ore., according to reports. The company hopes to hire former Intel workers. These are workers who lost their jobs as part of Intel's recent layoff. Anokiwave, a developer of chips for the mmWave market, has announced a foundry alliance with GlobalFoundries. GlobalFoundries will make so-called Silicon Core chips on a f... » read more

More EUV Mask Gaps
By Mark LaPedus - 17 Nov, 2016 - Comments: 12

Extreme ultraviolet (EUV) lithography is at a critical juncture. After several delays and glitches, [gettech id="31045" comment="EUV"] is now targeted for 7nm and/or 5nm. But there are still a number of technologies that must come together before EUV is inserted into mass production. And if the pieces don’t fall into place, EUV could slip again. First, the EUV source must generate more ... » read more

Human Factors In Automation Software
By Selim Nahas - 17 Nov, 2016 - Comments: 1

The semiconductor industry offers some of the most advanced manufacturing environments featuring sophisticated automation and cutting-edge process controls. A typical day in a fab revolves around the production of billions of highly complex, extremely small structures where even the tiniest variations can impact device performance. Even though these production processes are highly automated, te... » read more

Why EUV Is So Difficult
By Mark LaPedus - 17 Nov, 2016 - Comments: 23

For years, extreme ultraviolet (EUV) lithography has been a promising technology that was supposed to help enable advanced chip scaling. But after years of R&D, EUV is still not in production despite major backing from the industry, vast resources and billions of dollars in funding. More recently, though, [gettech id="31045" comment="EUV"] lithography appears to be inching closer to pos... » read more

Saving Energy In The Fab
By Katherine Derbyshire - 09 Nov, 2016 - Comments: 7

It’s not an exaggeration to say that integrated circuits are a critical component of any effort to reduce global carbon dioxide emissions. The most efficient engines depend on microcontrollers to optimize fuel consumption. Global shipping uses sophisticated simulators for load balancing and route planning. Computing power that once needed room-sized cooling units now fits in a battery-powered... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy