tag: interposers

2.5D Becomes A Reality
By Ed Sperling - 14 Apr, 2016 - Comments: 2

Semiconductor Engineering sat down to discuss 2.5D and advanced packaging with Max Min, senior technical manager at [getentity id="22865" e_name="Samsung"]; Rob Aitken, an [getentity id="22186" comment="ARM"] fellow; John Shin, vice president at [getentity id="22903" e_name="Marvell"]; Bill Isaacson, director of ASIC marketing at [getentity id="22242" e_name="eSilicon"]; Frank Ferro, senior di... » read more

Tech Talk: 2.5D Issues
By Ed Sperling - 25 Feb, 2016 - Comments: 0

Bill Isaacson, director of ASIC marketing at eSilicon, about how viable this packaging approach is, organic vs. inorganic interposers, where the problems are, thermal coupling, interposer cost, and what will change over the next couple years. » read more

Why Use A Package?
By Ed Sperling - 21 Jan, 2016 - Comments: 0

Subramanian Iyer, distinguished chancellor's professor in UCLA's Electrical Engineering Department—and a former fellow and director of the systems scaling technology department at IBM—sat down with Semiconductor Engineering to talk about the future of chip scaling. What follows are excerpts of that conversation. SE: Advanced packaging is being viewed as a way to extend scaling in the fut... » read more

Advanced Packaging Is Real. Now What?
By Ed Sperling - 14 Jan, 2016 - Comments: 0

For the past five years, it's been clear that 2.5D, fan-outs and other forms of system-in-package were on the horizon. Exactly when they would arrive no one knew. The most common prediction was that the timing would depend on when one of the big chipmakers decided to go down that route. The theory was that the remainder of the industry would follow, ecosystem issues would be sorted out—partic... » read more

Thinking Outside The Chip
By Ed Sperling - 14 Jan, 2016 - Comments: 0

Intel will begin adding 2.5D and 3D packaging into its processors, following the lead set by IBM and AMD in recognizing that new packaging approaches are essential for improving performance and lowering power. This shift won't derail the semiconductor industry's efforts to the reach future process nodes or continually shrink features, but it does add context for other factors that in... » read more

Rethinking Memory
By Ed Sperling - 16 Dec, 2015 - Comments: 3

Getting data in and out of memory is as important as the speed and efficiency of a processor, but for years design teams managed to skirt the issue because it was quicker, easier and less expensive to boost processor clock frequencies with a brute-force approach. That worked well enough prior to 90nm, and adding more cores at lower clock speeds filled the gap starting at 65nm. After that, th... » read more

Memory Choices Grow
By Ed Sperling - 24 Nov, 2015 - Comments: 1

Memory is becoming one of the starting points for SoC architectures, evolving from a basic checklist item that was almost always in the shadow of improving processor performance or lowering the overall power budget. In conjunction with that shift, chipmakers must now grapple with many more front-end decisions about placement, memory type and access prioritization. There are plenty of rules ... » read more

Raise A Fence, Dig A Tunnel, Build A Bridge
By Ed Sperling - 17 Sep, 2015 - Comments: 0

There are three main options for chipmakers over the course of the next decade. Which option they choose depends upon their individual needs, talents, and how much and what kind of differentiation they believe will matter to them. The options roughly fall into three categories—fence, bridge or tunnel. The fence option Rather than changing anything, the entire ecosystem can stick to wha... » read more

Advanced IC Packaging Biz Heats Up
By Mark LaPedus - 20 Aug, 2015 - Comments: 0

After a number of false starts and lackluster adoption, the advanced IC packaging market is finally heating up. On one front, for example, a new wave of chips based on advanced [getkc id="82" kc_name="2.5D"]/[getkc id="42" kc_name="3D"] stacked-die is entering the market. And on another front, the momentum is building for new and advanced 2D packages, such as embedded package-on-package (PoP... » read more

2.5D Creeps Into SoC Designs
By Ed Sperling - 13 Aug, 2015 - Comments: 0

A decade ago top chipmakers predicted that the next frontier for SoC architectures would be the z axis, adding a third dimension to improve throughput and performance, reduce congestion around memories, and reduce the amount of energy needed to drive signals. The obvious market for this was applications processors for mobile devices, and the first companies to jump on the stacked die bandwag... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy