tag: MEMS

Dynamic Fault Injection For System-Level Simulation Of MEMS
By Fraunhofer IIS/EAS - 08 Aug, 2018 - Comments: 0

In this paper a method for dynamic fault injection and fault simulation as well as its application to MEMS based sensor systems is described. The prerequisite for this approach is the availability of accurate, but numerically efficient models for the MEMS element. Simulations based on SystemC and SystemC AMS are suitable to analyze the nominal behavior of complex sys- tems including electronics... » read more

Mixed Outlook For Semi Biz
By Mark LaPedus - 25 Jul, 2018 - Comments: 0

Both the IC and fab equipment industries have been enjoying a boom cycle for some time, but they could be facing speed bumps and possibly turbulence in the second half of this year and into 2019. In the first half of 2018, the industry was fueled by the momentum carried over from 2017. DRAM prices remained relatively high, which contributed to the revenue growth in the overall IC industry. M... » read more

Chip Dis-Integration
By Brian Bailey - 14 Jun, 2018 - Comments: 2

Just because something can be done does not always mean that it should be done. One segment of the semiconductor industry is learning the hard way that continued chip integration has a significant downside. At the same time, another another group has just started to see the benefits of consolidating functionality onto a single substrate. Companies that have been following Moore's Law and hav... » read more

Delivering On The Promise Of Self-Driving Cars
By Stephen Breit - 13 Jun, 2018 - Comments: 1

Self-driving cars have been all the rage in both the trade and popular press in recent years. I prefer the term “autonomous vehicles,” which more broadly captures the possibilities, encompassing not only small passenger vehicles but mass transit and industrial vehicles as well. Depending on who’s talking, we will all be riding in fully autonomous vehicles in five to 25 years. The five-... » read more

Progress And Chaos On Road To Autonomy
By Jeff Dorsch - 03 Jun, 2018 - Comments: 1

Progress in the development of fully autonomous vehicles is incremental and slow, but not for lack of effort. Research and development in self-driving cars is under way all around the globe, from the biggest automotive manufacturers and their Tier 1 suppliers to companies not traditionally involved in the automotive industry. Add to that fleets of startups working on sensor technologies and ... » read more

200mm Fab Crunch
By Mark LaPedus - 21 May, 2018 - Comments: 2

Growing demand for analog, MEMS and RF chips continues to cause acute shortages for both 200mm fab capacity and equipment, and it shows no sign of letting up. Today, 200mm fab capacity is tight with a similar situation projected for the second half of 2018 and perhaps well into 2019. In fact, 2018 will likely represent the third consecutive year that 200mm fab capacity will be tight. The sam... » read more

Toward Autonomous Farming
By Ann Mutschler - 03 May, 2018 - Comments: 0

While the automotive industry works diligently towards self-driving vehicles, it's possible the carrots you've eaten recently were semi-autonomously planted and harvested with Case IH equipment by Bolthouse Farms, one of the largest carrot growers in the United States. And the U.S. is hardly alone. Autonomous agriculture is coming everywhere, and it's happening much faster than autonomous ca... » read more

Embedded Die Packaging Emerges
By Mark LaPedus - 09 Apr, 2018 - Comments: 1

Embedded die packaging is seeing renewed demand amid the push towards chips and systems that require smaller form factors. ASE, AT&S, GE, Shinko, Taiyo Yuden, TDK, Würth Elektronik and others compete in the merchant embedded die packaging market, according to Yole Développement. In fact, ASE and TDK have a joint venture in the arena, which is beginning to ramp up production. Additional... » read more

Mesh Networking Grows For ICs
By Kevin Fogarty - 04 Apr, 2018 - Comments: 0

Mesh networks were invented to create rich interaction among groups of almost-unrelated peers, but now they are showing up in everything from advanced chip packages to IoT networks. The flexibility of a many-to-many peer-connection model made the mesh approach a favorite for two-dimensional network-on-a-chip topologies, to the point where they began to supplant data-bus connections during th... » read more

Toward High-End Fan-Outs
By Ed Sperling - 05 Mar, 2018 - Comments: 1

Foundries and OSATs are working on more advanced fan-outs, including some with vertically stacked die inside the package, filling a middle ground between lower-cost fan-outs and systems in package on one side and 2.5D and 3D-ICs on the other. These new [getkc id="202" kc_name="fan-outs"] have denser interconnects than previous iterations, and in some cases they include multiple routing layer... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy