Sidestepping Moore’s Law

By Mark LaPedus - 20 Jun, 2019 - Comments: 2

Calvin Cheung, vice president of engineering at ASE, sat down with Semiconductor Engineering to talk about advanced packaging, the challenges involved with the technology, and the implications for Moore’s Law. What follows are excerpts of that conversation. SE: What are some of the big issues with IC packaging today? Cheung: Moore’s Law is slowing down, but transistor scaling will co... » read more

CEO Outlook: It Gets Much Harder From Here

By Ed Sperling - 03 Jun, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss what's changing across the semiconductor industry with Wally Rhines, CEO emeritus at Mentor, a Siemens Business; Jack Harding, president and CEO of eSilicon; John Kibarian, president and CEO of PDF Solutions; and John Chong, vice president of product and business development for Kionix. What follows are excerpts of that discussion, which was held in... » read more

Partitioning In 3D

By Katherine Derbyshire - 23 May, 2019 - Comments: 2

The best way to improve transistor density isn't necessarily to cram more of them onto a single die. Moore’s Law in its original form stated that device density doubles about every two years while cost remains constant. It relied on the observation that the cost of a processed silicon wafer remained constant regardless of the number of devices printed on it, which in turn depended on litho... » read more

Controlling Variability And Cost At 3nm And Beyond

By Ed Sperling - 22 May, 2019 - Comments: 1

Richard Gottscho, executive vice president and CTO of Lam Research, sat down with Semiconductor Engineering to talk about how to utilize more data from sensors in manufacturing equipment, the migration to new process nodes, and advancements in ALE and materials that could have a big impact on controlling costs. What follows are excerpts of that conversation. SE: As more sensors are added int... » read more

Chiplet Momentum Builds, Despite Tradeoffs

By Brian Bailey - 13 May, 2019 - Comments: 0

Chip design is a series of tradeoffs. Some are technical, others are related to cost, competitive features or legal restrictions. But with the nascent 'chiplet' market, many of the established balance points are significantly altered, depending on market segments and ecosystem readiness. Chiplets provide an alternative mechanism for integrating intellectual property (IP) blocks into a semico... » read more

Latency Under Load: HBM2 vs. GDDR6

By Ed Sperling - 09 May, 2019 - Comments: 0

Steven Woo, Rambus fellow and distinguished inventor, explains why data traffic and bandwidth are critical to choosing the type of DRAM, options for improving traffic flow in different memory types, and how this works with multiple memory types. Related Video GDDR6 - HBM2 Tradeoffs Why designers choose one memory type over another. Applications for each were clearly delineate... » read more

Target: 50% Reduction In Memory Power

By Brian Bailey - 11 Apr, 2019 - Comments: 3

Memory consumes about 50% or more of the area and about 50% of the power of an SoC, and those percentages are likely to increase. The problem is that static random access memory (SRAM) has not scaled in accordance with Moore's Law, and that will not change. In addition, with many devices not chasing the latest node and with power becoming an increasing concern, the industry must find ways to... » read more

Billion-Gate Design Connectivity

By Ed Sperling - 27 Mar, 2019 - Comments: 0

Sasa Stamenkovic, senior field application engineer at OneSpin Solutions, explains how to find and resolve connectivity issues in integrating large numbers of components in very big designs, often at the leading edge nodes and in markets such as AI. » read more

Why Analog Designs Fail

By Brian Bailey - 14 Feb, 2019 - Comments: 2

The gap between analog and digital reliability is growing, and digital designs appear to be winning. Reports show that analog content causes the most test failures and contributes significantly more than digital to field returns. The causes aren't always obvious, though. Some of it is due to the maturity of analog design and verification. While great strides have been made in digital circuit... » read more

Mapping The Impact Of Heat On Photonics

By Ed Sperling - 12 Feb, 2019 - Comments: 0

Heat and various types of noise can disrupt optical signals in silicon photonics applications, pushing light into frequencies that generally are filtered out. Unless those filters are adjusted, data may be lost or incomplete, and in the case of streaming data it may be impossible to reconstruct. But predicting when and how physical effects will affect light isn't always obvious, which makes ... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Moore’s law