Looking For The Next Big Thing

By Brian Bailey - 21 Aug, 2014 - Comments: 0

With [getkc id="74" comment="Moore's Law"] slowing down or coming to an end, finding the next big thing may be very different than it was in the past. We cannot assume that more of the same will be a winner. The semiconductor industry has been blessed with two new product categories that have catapulted it through what should have been a very difficult period with barely a scratch. Those techno... » read more

More Than Moore

By Ed Sperling - 21 Aug, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss the value of feature shrinks and what comes next with Steve Eplett, design technology and automation manager at Open-Silicon; Patrick Soheili, vice president and general manager of IP Solutions at eSilicon; Brandon Wang, engineering group director at Cadence; John Ferguson, product manager for DRC applications at Mentor Graphics; and Kevin Kranen, d... » read more

Different Approaches Emerge For Stacking Die

By Ed Sperling - 21 Aug, 2014 - Comments: 1

The concept of stacking die to shorten wires, improve performance, and reduce the amount of energy required to drive signals has been in research for at least the past dozen years at both IBM and Intel. And depending upon whom you ask, it could be another 2 to 10 years before it becomes a mainstream packaging approach—if it happens at all. At least part of the confusion stems from how you ... » read more

This Is What 450mm Wafers Look Like

By SEMI - 14 Aug, 2014 - Comments: 0

The first fully patterned 450mm wafers were on display at SEMICON West 2014 in South Hall and also showcased in the 450mm Technology Development Session. Fully patterned 450mm wafers produced using Molecular Imprints’ Imprio nanoimprint lithography (NIL) tool have been shown before (including at SEMI ISS meeting in January 2013). However, the 450mm wafers on display at SEMICON West were produ... » read more

More People Use Phones Than Toothbrushes…

By Karen Savala - 11 Aug, 2014 - Comments: 0

“Business Has Only Two Functions – Marketing and Innovation” — Milan Kundera There may be more to running a successful business than marketing and innovation, but these two functions were front-and-center at SEMICON West 2014. This year’s industry gathering was an important, and positive, step forward together. Because of the gravity of the challenges facing our industry – funda... » read more

Improving 2.5D Components

By Ed Sperling - 07 Aug, 2014 - Comments: 1

A lot of attention is being focused on improving designs at established, well-tested nodes where processes are mature, yields are high, and costs are under control. So what does this mean to stacking die? For 2.5D architectures, plenty. For 3D, probably not much. Here’s why: The advantage of 2.5D is that it can utilize dies created at whatever node makes sense. While the initial discuss... » read more

Established Nodes Getting New Attention

By Ed Sperling - 07 Aug, 2014 - Comments: 0

As the price of shrinking features increases below 28nm, there has been a corresponding push to create new designs at established nodes using everything from near-threshold computing to back biasing and mostly accurate analog sensors. The goals of power, performance and cost haven’t changed, but there is a growing realization among many chipmakers that the formula can be improved upon with... » read more

Improving The PPA Equation

By Ed Sperling - 24 Jul, 2014 - Comments: 0

The next generation of semiconductors may look very much like the existing generation. But like the old Porsche ads that required arrows to point to the improvements, because from the outside things basically looked the same, there should be plenty of impressive stuff inside. As the cost per transistor continues to rise at advanced nodes, the focus for most companies is no longer about shrin... » read more

New Winners And Losers

By Brian Bailey - 24 Jul, 2014 - Comments: 0

During DAC 2013, Robert Colwell of DARPA said he was attempting to prepare the U.S. Dept. of Defense for what he believes is the cataclysm caused by the end of [getkc id="74" comment="Moore's Law"]. He asked the question, “What happens when we don’t have a new technology that doubles the number of transistors every couple of years?” Colwell believes that power is the primary reason why... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Moore’s Law