tag: Movellus

Maximizing Value Post-Moore’s Law
By Brian Bailey - 13 Jul, 2020 - Comments: 0

When Moore's Law was in full swing, almost every market segment considered moving to the next available node as a primary way to maximize value. But today, each major market segment is looking at different strategies that are more closely aligned with its individual needs. This diversity will end up causing both pain and opportunities in the supply chain. Chip developers must do more with a ... » read more

Low-Power Analog
By Brian Bailey - 14 May, 2020 - Comments: 3

Analog circuitry is usually a small part of a large SoC, but it does not scale in the same way as digital circuitry under Moore's Law. The power consumed by analog is becoming an increasing concern, especially for battery-operated devices. At the same time, little automation is available to help analog designers reduce consumption. "Newer consumer devices, like smartphones and wearables, alo... » read more

Big Design, IP and End Market Shifts In 2020
By Brian Bailey - 30 Jan, 2020 - Comments: 0

EDA is on a roll. Design starts are up significantly thanks to increased investment in areas such as AI, a plethora of new communications standards, buildout of the Cloud, the race toward autonomous driving and continued advancements in mobile phones. Many designs demand the latest technologies and push the limits of complexity. Low power is becoming more than just reducing wasted power at t... » read more

A New Dawn For IP
By Brian Bailey - 12 Dec, 2019 - Comments: 0

The IP industry is changing again. The concept started as build once, use everywhere, but today it is more like architect once, customize everywhere. Few designs can afford sub-optimal IP for their application. The need for customized IP is driven by both leading-edge designs and the trailing markets, although for different reasons. While this customization is causing IP companies to transfo... » read more

Why Chips Are Getting Noisier
By Brian Bailey - 13 Jun, 2019 - Comments: 4

In the past, designers only had to worry about noise for sensitive analog portions of a design. Digital circuitry was immune. But while noise gets worse at newer process nodes, staying at 28nm does not mean that it can be ignored anymore. With Moore's Law slowing, designs have to do more with less. Margins are being squeezed, additional concurrency is added, and attempts are made to opti... » read more

Week In Review: Design, Low Power
By Jesse Allen - 05 Apr, 2019 - Comments: 0

Tools & IP Cadence entered the system design and analysis market with the release of Clarity 3D Solver, which creates S-parameter models for use in signal integrity, power integrity, and electromagnetic compliance analysis. The tool uses a distributed adaptive meshing approach for cloud and on-premises distributed computing and it optimized to distribute a job across multiple low-cost comp... » read more

Week In Review: Design, Low Power
By Jesse Allen - 14 Dec, 2018 - Comments: 0

The MIPI Alliance released MIPI I3C Basic v1.0, a subset of the MIPI I3C sensor interface specification that bundles 20 of the most commonly needed I3C features for developers and other standards organizations. The royalty-free specification includes backward compatibility with I2C, 12.5 MHz multi-drop bus that is over 12 times faster than I2C supports, in-band interrupts to allow slaves to not... » read more

Minimizing Chip Aging Effects
By Brian Bailey - 13 Sep, 2018 - Comments: 2

Aging kills semiconductors, and it is a growing problem for an increasing number of semiconductor applications—especially as they migrate to more advanced nodes. Additional analysis and prevention methods are becoming necessary for safety critical applications. While some aspects of aging can be mitigated up front, others are tied to the operation of the device. What can an engineering tea... » read more

Chip Aging Becomes Design Problem
By Brian Bailey - 09 Aug, 2018 - Comments: 9

Chip aging is a growing problem at advanced nodes, but so far most design teams have not had to deal with it. That will change significantly as new reliability requirements roll out across markets such as automotive, which require a complete analysis of factors that affect aging. Understanding the underlying physics is critical, because it can lead to unexpected results and vulnerabilities. ... » read more

Safety, Security And PPA Tradeoffs
By Brian Bailey - 23 Jul, 2018 - Comments: 0

Safety and security are emerging as key design tradeoffs as chips are added into safety-critical markets, adding even more complexity into an already complicated optimization process. In the early days of semiconductor design, performance and area were traded off against each other. Then power became important, and the main tradeoffs became power, performance and area (PPA). But as chips inc... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy